On 12/11/06, Tim <ignored_mailbox@xxxxxxxxxxxx> wrote:
On Mon, 2006-12-11 at 21:58 -0500, Mike Chalmers wrote: > In Linux I had the terminal open while I was browsing and my computer > beeped. I wondered what had happened so I looked at the terminal to > see if there was anything going on. And it said something like CPU 0 > temperature high (or something like that) CPU 1 temperature high. What is it that tells you that information? I wonder if it's the infamous lm_sensors, with its uncalibrated (*) sensor readings. On one of my systems I have some things with negative temparatures, and others well over boiling point. They're wrong, of course. * It's not really its fault, there isn't any reliable way to calibrate the readings. You'd have to get voltage probes out and work out that when some rail reading says 4.6 for the sensor, but it's actually 5.1, that a conversion needs to be done on the figures. Likewise with temperatures and other readings. My advice would be to turn off lm_sensors, and turn on temperature warnings in your BIOS. At least the manufacturer ought to know how to read the sensors in the board that they built. I've got at least a couple of boxes set up that way, a beeps if it gets too warm, and will shut down if it gets too hot. They also protect themselves even if the OS has crashed. -- (Currently testing FC5, but still running FC4, if that's important.) Don't send private replies to my address, the mailbox is ignored. I read messages from the public lists. -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
I have a Intel D875PBZ, I have looked through the BIOS but have never thought to look for temperature warnings. I will have to check on that. Thanks.
