On 08/09/2010 09:31 AM, binarynut@xxxxxxxxxxx wrote: > Yeah, your right about that. > > 2.6.33.6-147.2.4.fc13.i686 > > Can it also be compiled on a X86_64 I do not think so. 2.6.33.6-147.2.4.fc13.i686 does not have this function defined either. If you download the source rpm of 2.6.33.6-147.2.4.fc13 from http://mirrors.kernel.org/fedora/updates/13/SRPMS/kernel-2.6.33.6-147.2.4.fc13.src.rpm and run: rpm -ivh kernel-2.6.33.6-147.2.4.fc13.src.rpm then cd ~/rpmbuild/SPECS rpmbuild -bp kernel.spec cd ../BUILD/ cd kernel-2.6.33/linux-2.6.33/staging mv rt2860 rt2860.orig At this point you will need my working rt2860 source code. If you want to, I will email it to you personal email address. you will then untar it in the staging dir you see above. After you untar it, cd ../.. cp /boot/config-2.6.33.6-147.2.4.fc13.i686 .config make oldconfig make xconfig in xconfig, scroll down til you see "staging" below "drivers" click on staging on the right hand side, scroll down and check rt2860 save (click on the floppy icon at top left) exit from xconfig gui make all sudo make modules_install install reboot into the newly built kernel (press return as soon as you get the grub boot screen) From the grub menu, select the new kernel you just built (should be at the top). Let me know. -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
