Re: f8: PC dies while using firefox

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 2008-05-05 at 16:18 -0430, Patrick O'Callaghan wrote:
> [You seem to have sent this just to me, though part of the reply is
> directed at a wider audience -- poc]
> 
> On Mon, 2008-05-05 at 12:13 -0700, Les wrote:
> > On Sun, 2008-05-04 at 17:45 -0430, Patrick O'Callaghan wrote:
> > > On Sun, 2008-05-04 at 12:44 -0700, Les wrote:
> > > > On Fri, 2008-05-02 at 16:49 -0430, Patrick O'Callaghan wrote:
> > > > > On Fri, 2008-05-02 at 13:41 -0700, Les wrote:
> > > > > > By the way, someone recommended using Evince instead of acroread.  That
> > > > > > is a good idea, but I don't see how to eliminate acroread from my
> > > > > > system.  So If anyone can point me to some instructions on how to remove
> > > > > > acroread and run evince, that would be appreciated.
> > > > > 
> > > > > To remove acroread: yum erase acroread
> > > > > To use Evince (or whatever): in Firefox, Edit->Preferences->Applications
> > > > > (or Content, depending on FF version).
> > > > > 
> > > > > poc
> > > > > 
> > > > Hi, poc,
> > > > 	I had tried that, and it didn't work the first time.  However I have
> > > > reset the appropriate sections in Firefox now and that seems to have
> > > > alleviated the problems.  The command yum erase acroread didn't seem to
> > > > work either, then I checked to see if it was listed in the software GUI,
> > > > and it wasn't.  I didn't really expect it to be there, but thought I
> > > > would look anyway.  I downloaded the rpm from adobe and installed it.
> > > > 
> > > > I did expect the yum erase command to work??  
> > > 
> > > It should, if your databases are clean. You can always do 'yum clean
> > > metadata' or 'yum clean all' to make sure.
> > > 
> > > > I now seem to have evince running and have seen better performance from
> > > > Firefox.  Thank you for your assistance.  I had used that menu before,
> > > > but forgot about it.  I had tried the about: plugins operation without
> > > > success.
> > > 
> > > OK, glad it worked out. BTW okular is also worth a look as a reader for
> > > PDF and other files.
> > > 
> > > poc
> > > 
> > I'll check that out.  For now Evince has me running fine, and the cpu
> > slowdowns were due to a little spider making a web which was sucked into
> > the cpu fan, either stopping or slowing it down.  I removed the whole
> > heatsink/fan assembly, vacuumed it from both ends and around the fan, so
> > things are much better now.  I had to run to Radio Shack for some more
> > heatsink compound, because what I had here had disappeared into the maw
> > of my "nest" here in my computer room.  I'll find it when I nest flush
> > things out.
> > 
> > 	For those of you with computer slow downs, one thing that happened
> > during that heavy usage (apparently caused by some bug in npviewer), the
> > heatsink compound had dried up almost completely.  It is supposed to get
> > thick and adhere a bit in most cases (at least from my long ago
> > experience in maintaining things.) but if it gets totally dry, you lose
> > some of the conductivity.  So for the rest of you with the npviewer bug
> > issue, check your fans and cpu interface.  The fan unit is usually held
> > on with two clips, so you remove the clips and just lift the fan and
> > heatsink off. Vacuum it well, fan, heatsink from the sides where it is
> > open, and then clean the top of the processor and the bottom of the
> > heatsink with a kleenex or soft cloth.  Do not use any water or soap or
> > spray cleaner, just wipe it clean.  Place a thin layer of new heatsink
> > compound on it, then replace the fan unit square with the socket
> > bracket, and reinstall the clips.  As long as you do not remove the cpu
> > from its socket, things will be copacetic and you will not have any
> > issues.  There are cleaning materials you can use, and if you are
> > curious you can check with your local computer parts store for their
> > recommendation, but in my experience, just cleaning both surfaces well
> > and recoating works well.
> 
> I've done that in the past, for slight improvement and a lot of effort,
> on a Pentium IV. I believe the paste should on fact be as thin as
> possibly rather than thick, at least according to the instructions.
> 
> I finally gave up and switched to a Core 2 Duo and haven't had problems
> since. The Pentium seemed to be too close to its design limit for
> temperature, despite an Intel-approved case and fan and an Intel mobo,
> and actually crashed several times on cpu-intensive stuff like
> compressing videos.
> 
> poc
> 
You are right, I did mean for this to go to the list, so this reply is
so stated.  I don't know if it will find its rightful place in the
thread, though.

I should have said viscous instead of thick for how it should appear.
Yes, a thin layer as I did state later.

My system has now been on for an hour with no signs of heating up, nor
the throttling.
Regards,
Les H


-- 
fedora-list mailing list
[email protected]
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list

[Index of Archives]     [Current Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

  Powered by Linux