On Tue, 2006-12-12 at 16:32 +0800, Hadders wrote: > Sean Bruno wrote: > >> I assume you're talking about having problems with Software RAID in FC6? > >> > >> H > >> > >> > > Yes. I wish I could get to the point of 'having problems' with Software > > Raid. I can't seem to get anaconda to _not see_ the fake raid device > > and just pretend /dev/sda and /dev/sdb are just disk. > > > > On a related note, _if_ I do try to use the fake raid devices, i.e. > > configure the drives for RAID 1 in the BIOS and use the /dev/mapper > > device, the installer will fail after creating the file systems with > > some kind of lvm error: > > > > > > 19:32:02 DEBUG : Member: binutils.x86_64 0-2.17.50.0.3-6 - u > > 19:32:02 DEBUG : Adding Package binutils - 2.17.50.0.3-6.x86_64 in mode u > > 19:32:02 DEBUG : Member: m4.x86_64 0-1.4.5-3 - u > > 19:32:02 DEBUG : Adding Package m4 - 1.4.5-3.x86_64 in mode u > > > > > > /tmp/lvmout: > > Finding all logical volumes > > No volume groups found > > > > > > > > Sean > > > > > any reason why you're using logical volume management? > Have you booted up in rescue mode, what does "dmraid -s -g" say about > the RAID containers and subsets? > LVM is setup by default as far as I can tell. I wouldn't have used it at all except I wanted to change as little as possible from the default install as I seem to be running into a problem. dmraid shows no raidsets at all. dmraid -d -g No RAID disks Sean
