Hello,
I am using an Acer Aspire 5612NWLCi notebook, i didnt managed
to start up after sleep from the system. or most of the time cannot
sleep at all.
I had to manually press the shutdown key in the notebook and it
really hurt my harddisk. I had very hardworking to google the
troubleshooting but found nothing helpful.
This sleep and awake function is very important for me as i am
sales person showing demo 4-5 times a day, everytime i would force
shutdown with button, is really killing.
Please help me. I dmesg the hardware spect and also paste the
pm-suspend.log for you.
Best Regards,
Nicholas Yau (Malaysia)
dmesg result:
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.31.9-174.fc12.i686
(mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.4.2 20091027
(Red Hat 4.4.2-7) (GCC) ) #1 SMP Mon Dec 21 06:24:20 UTC 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007f680000 (usable)
BIOS-e820: 000000007f680000 - 000000007f700000 (ACPI NVS)
BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
DMI present.
last_pfn = 0x7f680 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 07F700000 mask FFFF00000 uncachable
2 base 07F800000 mask FFF800000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
PAT not supported by CPU.
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2039MB, range: 1MB, type UC
reg 2, base: 2040MB, range: 8MB, type UC
total RAM coverred: 2039M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 3 lose
cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2039MB, range: 1MB, type UC
reg 2, base: 2040MB, range: 8MB, type UC
initial memory mapped : 0 - 01000000
init_memory_mapping: 0000000000000000-00000000373fe000
Using x86 segment limits to approximate NX protection
0000000000 - 0000400000 page 4k
0000400000 - 0037000000 page 2M
0037000000 - 00373fe000 page 4k
kernel direct mapping tables up to 373fe000 @ 7000-d000
RAMDISK: 37543000 - 37fef6d3
Allocated new RAMDISK: 00acc000 - 015786d3
Move RAMDISK from 0000000037543000 - 0000000037fef6d2 to 00acc000 -
015786d2
ACPI: RSDP 000f6290 00014 (v00 ACRSYS)
ACPI: RSDT 7f685ebd 00050 (v01 ACRSYS ACRPRDCT 06040000 LTP 00000000)
ACPI: FACP 7f68cc76 00074 (v01 Acer Grape 06040000 LOHR 0000005A)
ACPI: DSDT 7f686ee3 05D93 (v01 Acer CALISTGA 06040000 INTL 20050228)
ACPI: FACS 7f68dfc0 00040
ACPI: APIC 7f68ccea 00068 (v01 Acer Grape 06040000 LOHR 0000005A)
ACPI: HPET 7f68cd52 00038 (v01 Acer Grape 06040000 LOHR 0000005A)
ACPI: MCFG 7f68cd8a 0003C (v01 Acer Grape 06040000 LOHR 0000005A)
ACPI: SLIC 7f68cdc6 00176 (v01 ACRSYS ACRPRDCT 06040000 LOHR 00000000)
ACPI: DBGP 7f68cf3c 00034 (v01 Acer Grape 06040000 LOHR 00000000)
ACPI: APIC 7f68cf70 00068 (v01 PTLTD APIC 06040000 LTP 00000000)
ACPI: BOOT 7f68cfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SSDT 7f68647f 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228)
ACPI: SSDT 7f6863d9 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228)
ACPI: SSDT 7f685f0d 004CC (v01 PmRef CpuPm 00003000 INTL 20050228)
ACPI: BIOS bug: multiple APIC/MADT found, using 0
ACPI: If "acpi_apic_instance=2" works better, notify
linux-acpi@xxxxxxxxxxxxxxx
ACPI: Local APIC address 0xfee00000
1154MB HIGHMEM available.
883MB LOWMEM available.
mapped low ram: 0 - 373fe000
low ram: 0 - 373fe000
node 0 low ram: 00000000 - 373fe000
node 0 bootmap 0000a000 - 00010e80
(9 early reservations) ==> bootmem [0000000000 - 00373fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 -
0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 -
0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 -
0000007000]
#3 [0000400000 - 0000ac6a30] TEXT DATA BSS ==> [0000400000 -
0000ac6a30]
#4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 -
0000100000]
#5 [0000ac7000 - 0000acb0d5] BRK ==> [0000ac7000 -
0000acb0d5]
#6 [0000007000 - 000000a000] PGTABLE ==> [0000007000 -
000000a000]
#7 [0000acc000 - 00015786d3] NEW RAMDISK ==> [0000acc000 -
00015786d3]
#8 [000000a000 - 0000011000] BOOTMAP ==> [000000a000 -
0000011000]
found SMP MP-table at [c00f6340] f6340
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x000373fe
HighMem 0x000373fe -> 0x0007f680
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0007f680
On node 0 totalpages: 521759
free_area_init_node: node 0, pgdat c097c3e0, node_mem_map c1579000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 1736 pages used for memmap
Normal zone: 220470 pages, LIFO batch:31
HighMem zone: 2310 pages used for memmap
HighMem zone: 293244 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages at c2573000, static data 34428 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517681
Kernel command line: ro root=/dev/mapper/vg_luesco-lv_root rhgb quiet
SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us
PID hash table entries: 4096 (order: 12, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 10437120 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000373fe:0007f680)
Memory: 2040812k/2087424k available (3504k kernel code, 45388k reserved,
2176k data, 432k init, 1182216k highmem)
virtual kernel memory layout:
fixmap : 0xffad5000 - 0xfffff000 (5288 kB)
pkmap : 0xff400000 - 0xff800000 (4096 kB)
vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
.init : 0xc098d000 - 0xc09f9000 ( 432 kB)
.data : 0xc076c2af - 0xc098c668 (2176 kB)
.text : 0xc0400000 - 0xc076c2af (3504 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:1280
Fast TSC calibration using PIT
Detected 1662.652 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer
frequency.. 3325.30 BogoMIPS (lpj=1662652)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Performance Counters: no PMU driver, software counters only.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090521
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20238 entries in 40 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Genuine Intel(R) CPU T2300 @ 1.66GHz stepping 08
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3324.93 BogoMIPS
(lpj=1662466)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
mce: CPU supports 6 MCE banks
CPU1: Thermal monitoring enabled (TM1)
CPU1: Genuine Intel(R) CPU T2300 @ 1.66GHz stepping 08
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (6650.23 BogoMIPS).
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=352 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=500 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=192 bytes
sizeof(task_struct)=3256 bytes
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
Booting paravirtualized kernel on bare hardware
regulator: core version 0.5
Time: 22:17:03 Date: 01/15/10
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab<bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 32bit mmio: [0xf0000000-0xf007ffff]
pci 0000:00:02.0: reg 14 io port: [0x5088-0x508f]
pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff]
pci 0000:00:02.0: reg 1c 32bit mmio: [0xf0300000-0xf033ffff]
pci 0000:00:02.1: reg 10 32bit mmio: [0xf0080000-0xf00fffff]
pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0340000-0xf0343fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x50a0-0x50bf]
pci 0000:00:1d.1: reg 20 io port: [0x50c0-0x50df]
pci 0000:00:1d.2: reg 20 io port: [0x50e0-0x50ff]
pci 0000:00:1d.3: reg 20 io port: [0x5400-0x541f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0544000-0xf05443ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0230 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff20 (mask 000f)
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0x5090-0x509f]
pci 0000:00:1f.3: reg 20 io port: [0x5420-0x543f]
pci 0000:00:1c.0: bridge io port: [0x00-0xfff]
pci 0000:00:1c.0: bridge 32bit mmio: [0x000000-0x0fffff]
pci 0000:05:00.0: reg 10 32bit mmio: [0xf0100000-0xf0100fff]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable
it with 'pcie_aspm=force'
pci 0000:00:1c.3: bridge 32bit mmio: [0xf0100000-0xf01fffff]
pci 0000:06:01.0: reg 10 32bit mmio: [0xf0200000-0xf0201fff]
pci 0000:06:01.0: supports D1 D2
pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:01.0: PME# disabled
pci 0000:06:04.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:06:04.0: supports D1 D2
pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:04.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xf0200000-0xf02fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 5 *6 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 5 6 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 5 6 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 5 6 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 5 6 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 5 6 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 5 6 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 *5 6 11 12 14 15)
vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but
clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:1c.0: BAR 13: can't allocate resource
pci 0000:00:1c.0: BAR 14: can't allocate resource
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
system 00:06: ioport range 0x800-0x80f has been reserved
system 00:06: ioport range 0x1000-0x107f has been reserved
system 00:06: ioport range 0x1180-0x11bf has been reserved
system 00:06: ioport range 0x1640-0x164f has been reserved
system 00:06: ioport range 0xfe00-0xfefe has been reserved
system 00:06: ioport range 0xff2c-0xff2f has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: disabled
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1: IO window: disabled
pci 0000:00:1c.1: MEM window: disabled
pci 0000:00:1c.1: PREFETCH window: disabled
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.2: IO window: disabled
pci 0000:00:1c.2: MEM window: disabled
pci 0000:00:1c.2: PREFETCH window: disabled
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.3: IO window: disabled
pci 0000:00:1c.3: MEM window: 0xf0100000-0xf01fffff
pci 0000:00:1c.3: PREFETCH window: disabled
pci 0000:06:04.0: CardBus bridge, secondary bus 0000:07
pci 0000:06:04.0: IO window: 0x002000-0x0020ff
pci 0000:06:04.0: IO window: 0x002400-0x0024ff
pci 0000:06:04.0: PREFETCH window: 0x80000000-0x83ffffff
pci 0000:06:04.0: MEM window: 0x84000000-0x87ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
pci 0000:00:1e.0: IO window: 0x2000-0x2fff
pci 0000:00:1e.0: MEM window: 0xf0200000-0xf02fffff
pci 0000:00:1e.0: PREFETCH window: 0x80000000-0x83ffffff
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: enabling device (0004 -> 0007)
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:06:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:02: resource 0 mem: [0x0-0xfff]
pci_bus 0000:02: resource 1 mem: [0x0-0xfffff]
pci_bus 0000:05: resource 1 mem: [0xf0100000-0xf01fffff]
pci_bus 0000:06: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:06: resource 1 mem: [0xf0200000-0xf02fffff]
pci_bus 0000:06: resource 2 pref mem [0x80000000-0x83ffffff]
pci_bus 0000:06: resource 3 io: [0x00-0xffff]
pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:07: resource 0 io: [0x2000-0x20ff]
pci_bus 0000:07: resource 1 io: [0x2400-0x24ff]
pci_bus 0000:07: resource 2 pref mem [0x80000000-0x83ffffff]
pci_bus 0000:07: resource 3 mem: [0x84000000-0x87ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
Freeing initrd memory: 10929k freed
Simple Boot Flag at 0x36 set to 0x1
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1263593822.889:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1699
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X
pcieport-driver 0000:00:1c.3: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
decode_hpp: Could not get hotplug parameters. Use defaults
acpiphp: Slot [1] registered
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
ACPI: SSDT 7f686c25 001F6 (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
ACPI: SSDT 7f6866de 004C2 (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor LNXCPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7f686e1b 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
ACPI: SSDT 7f686ba0 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor LNXCPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (51 C)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (51 C)
isapnp: Scanning for PnP cards...
ACPI: EC: GPE storm detected, transactions will use polling mode
isapnp: No Plug& Play device found
ACPI: Battery Slot [BAT1] (battery present)
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 945GM Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input4
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5090 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5098 irq 15
Fixed MDIO Bus: probed
ata2: port disabled. ignoring.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0544000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.31.9-174.fc12.i686 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x000050a0
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.31.9-174.fc12.i686 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x000050c0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.31.9-174.fc12.i686 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000050e0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.31.9-174.fc12.i686 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00005400
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.31.9-174.fc12.i686 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
dm-devel@xxxxxxxxxx
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input5
No TPM chip found, activating TPM-bypass!
Magic number: 10:150:300
rtc_cmos 00:07: setting system clock to 2010-01-15 22:17:04 UTC
(1263593824)
Initalizing network drop monitor service
ata1.00: ATA-7: WDC WD800BEVE-11UYT0, 01.04A01, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA48
ata1.01: ATAPI: UJDA770 DVD/CDRW, 1.00, max UDMA/33
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA WDC WD800BEVE-11 01.0 PQ: 0
ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 0:0:1:0: CD-ROM MATSHITA UJDA770 DVD/CDRW 1.00 PQ: 0
ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
sr 0:0:1:0: Attached scsi generic sg1 type 5
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 432k freed
Write protecting the kernel text: 3508k
Write protecting the kernel read-only data: 1696k
dracut: dracut-002-13.4.git8f397a9b.fc12
udev: starting version 145
input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/input/input6
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
usb 3-1: new low speed USB device using uhci_hcd and address 2
Clocksource tsc unstable (delta = -85121113 ns)
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps:
0xa04713/0x204000
input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio4/input/input7
usb 3-1: New USB device found, idVendor=045e, idProduct=0084
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: Basic Optical Mouse
usb 3-1: Manufacturer: Microsoft
usb 3-1: configuration #1 chosen from 1 choice
input: Microsoft Basic Optical Mouse as
/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input8
generic-usb 0003:045E:0084.0001: input,hidraw0: USB HID v1.10 Mouse
[Microsoft Basic Optical Mouse] on usb-0000:00:1d.1-1/input0
[drm] TV-14: set mode NTSC 480i 0
fbcon: inteldrmfb (fb0) is primary device
[drm] LVDS-8: set mode 1280x800 1d
Console: switching to colour frame buffer device 160x50
fb0: inteldrmfb frame buffer device
registered panic notifier
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
dracut: Starting plymouth daemon
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
yenta_cardbus 0000:06:04.0: CardBus bridge found [1025:0090]
yenta_cardbus 0000:06:04.0: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:06:04.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:06:04.0: TI: mfunc 0x00111c12, devctl 0x44
yenta_cardbus 0000:06:04.0: ISA IRQ mask 0x0cf8, PCI irq 16
yenta_cardbus 0000:06:04.0: Socket status: 30000006
pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07
to #0a
yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge I/O window: 0x2000
- 0x2fff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: clean.
yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge Memory window:
0xf0200000 - 0xf02fffff
yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge Memory window:
0x80000000 - 0x83ffffff
dracut: Scanning devices sda3 for LVM volume groups
dracut: Reading all physical volumes. This may take a while...
dracut: Found volume group "vg_luesco" using metadata type lvm2
dracut: 2 logical volume(s) in volume group "vg_luesco" now active
EXT4-fs (dm-0): barriers enabled
kjournald2 starting: pid 267, dev dm-0:8, commit interval 5 seconds
EXT4-fs (dm-0): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (dm-0): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/mapper/vg_luesco-lv_root
dracut: Switching root
udev: starting version 145
ACPI: WMI: Mapper loaded
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ACPI: I/O resource 0000:00:1f.3 [0x5420-0x543f] conflicts with ACPI
region SMBI [0x5420-0x542f]
ACPI: If an ACPI driver is available for this device, you should use it
instead of the native driver
cfg80211: Calling CRDA to update world regulatory domain
intel_rng: FWH not detected
acer-wmi: Acer Laptop ACPI-WMI Extras
Registered led device: acer-wmi::mail
acerhdf: Acer Aspire One Fan driver, v.0.5.16
acerhdf: unknown (unsupported) BIOS version Acer /Aspire
5610 /V3.60, please report, aborting!
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for
Linux, 1.2.26kds
iwl3945: Copyright(c) 2003-2009 Intel Corporation
iwl3945 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
iwl3945 0000:05:00.0: setting latency timer to 64
iwl3945 0000:05:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
iwl3945 0000:05:00.0: Detected Intel Wireless WiFi Link 3945ABG
iwl3945 0000:05:00.0: irq 28 for MSI/MSI-X
name_count maxed, losing inode data: dev=00:05, inode=5786
name_count maxed, losing inode data: dev=00:05, inode=5786
name_count maxed, losing inode data: dev=00:05, inode=5786
name_count maxed, losing inode data: dev=00:05, inode=5786
name_count maxed, losing inode data: dev=00:05, inode=5786
name_count maxed, losing inode data: dev=00:05, inode=5786
name_count maxed, losing inode data: dev=00:05, inode=5801
name_count maxed, losing inode data: dev=00:05, inode=5801
name_count maxed, losing inode data: dev=00:05, inode=5801
name_count maxed, losing inode data: dev=00:05, inode=5801
name_count maxed, losing inode data: dev=00:05, inode=5801
name_count maxed, losing inode data: dev=00:05, inode=5801
name_count maxed, losing inode data: dev=00:05, inode=5801
name_count maxed, losing inode data: dev=00:05, inode=5801
name_count maxed, losing inode data: dev=00:05, inode=5801
name_count maxed, losing inode data: dev=00:05, inode=5801
name_count maxed, losing inode data: dev=00:05, inode=5801
name_count maxed, losing inode data: dev=00:05, inode=5801
name_count maxed, losing inode data: dev=00:05, inode=5801
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding
0x4d0-0x4d7
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
b44 0000:06:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
b44 0000:06:01.0: setting latency timer to 64
ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0
b44.c:v2.0
eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:0f:b0:98:fb:54
name_count maxed, losing inode data: dev=00:05, inode=5786
name_count maxed, losing inode data: dev=00:05, inode=5865
phy0: Selected rate control algorithm 'iwl-3945-rs'
name_count maxed, losing inode data: dev=00:05, inode=5786
name_count maxed, losing inode data: dev=00:05, inode=5867
name_count maxed, losing inode data: dev=00:05, inode=5867
name_count maxed, losing inode data: dev=00:05, inode=5867
name_count maxed, losing inode data: dev=00:05, inode=5867
name_count maxed, losing inode data: dev=00:05, inode=5867
name_count maxed, losing inode data: dev=00:05, inode=5867
name_count maxed, losing inode data: dev=00:05, inode=5867
name_count maxed, losing inode data: dev=00:05, inode=5867
name_count maxed, losing inode data: dev=00:05, inode=5867
name_count maxed, losing inode data: dev=00:05, inode=5867
name_count maxed, losing inode data: dev=00:05, inode=5867
name_count maxed, losing inode data: dev=00:05, inode=5867
name_count maxed, losing inode data: dev=00:05, inode=5867
name_count maxed, losing inode data: dev=00:05, inode=5867
name_count maxed, losing inode data: dev=00:05, inode=5867
name_count maxed, losing inode data: dev=00:05, inode=5867
name_count maxed, losing inode data: dev=00:05, inode=5867
name_count maxed, losing inode data: dev=00:05, inode=5786
name_count maxed, losing inode data: dev=00:05, inode=5885
name_count maxed, losing inode data: dev=00:05, inode=5885
name_count maxed, losing inode data: dev=00:05, inode=5886
name_count maxed, losing inode data: dev=00:05, inode=5886
name_count maxed, losing inode data: dev=00:05, inode=5886
name_count maxed, losing inode data: dev=00:05, inode=5886
name_count maxed, losing inode data: dev=00:05, inode=5886
name_count maxed, losing inode data: dev=00:05, inode=5886
name_count maxed, losing inode data: dev=00:05, inode=5886
name_count maxed, losing inode data: dev=00:05, inode=5886
name_count maxed, losing inode data: dev=00:05, inode=5886
name_count maxed, losing inode data: dev=00:05, inode=5887
name_count maxed, losing inode data: dev=00:05, inode=5887
name_count maxed, losing inode data: dev=00:05, inode=5887
cfg80211: World regulatory domain updated:
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
cfg80211: Calling CRDA for country: MY
cfg80211: Regulatory domain changed to country: MY
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2482000 KHz @ 20000 KHz), (N/A, 2000 mBm)
(5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 3000 mBm)
(5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 3000 mBm)
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
name_count maxed, losing inode data: dev=00:05, inode=6253
name_count maxed, losing inode data: dev=00:05, inode=6253
name_count maxed, losing inode data: dev=00:05, inode=6253
name_count maxed, losing inode data: dev=00:05, inode=6253
name_count maxed, losing inode data: dev=00:05, inode=6253
name_count maxed, losing inode data: dev=00:05, inode=6253
name_count maxed, losing inode data: dev=00:05, inode=6253
name_count maxed, losing inode data: dev=00:05, inode=6253
name_count maxed, losing inode data: dev=00:05, inode=6253
name_count maxed, losing inode data: dev=00:05, inode=6253
name_count maxed, losing inode data: dev=00:05, inode=6253
name_count maxed, losing inode data: dev=00:05, inode=6253
name_count maxed, losing inode data: dev=00:05, inode=6253
name_count maxed, losing inode data: dev=00:05, inode=6253
name_count maxed, losing inode data: dev=00:05, inode=6253
name_count maxed, losing inode data: dev=00:05, inode=6253
name_count maxed, losing inode data: dev=00:05, inode=6253
name_count maxed, losing inode data: dev=00:05, inode=6253
name_count maxed, losing inode data: dev=00:05, inode=6253
name_count maxed, losing inode data: dev=00:05, inode=6253
name_count maxed, losing inode data: dev=00:05, inode=6253
name_count maxed, losing inode data: dev=00:05, inode=6253
name_count maxed, losing inode data: dev=00:05, inode=6253
device-mapper: multipath: version 1.1.0 loaded
EXT4-fs (dm-0): internal journal on dm-0:8
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.12)
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 4112376k swap on /dev/mapper/vg_luesco-lv_swap. Priority:-1
extents:1 across:4112376k
QEMU Accelerator Module version 1.4.0, Copyright (c) 2005-2008 Fabrice
Bellard
KQEMU installed, max_locked_mem=1026504kB.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
iwl3945 0000:05:00.0: firmware: requesting iwlwifi-3945-2.ucode
iwl3945 0000:05:00.0: loaded firmware version 15.32.2.9
Registered led device: iwl-phy0::radio
Registered led device: iwl-phy0::assoc
Registered led device: iwl-phy0::RX
Registered led device: iwl-phy0::TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ADDRCONF(NETDEV_UP): eth0: link is not ready
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
CIFS VFS: Error connecting to socket. Aborting operation
CIFS VFS: cifs_mount failed w/return code = -101
CIFS VFS: Error connecting to socket. Aborting operation
CIFS VFS: cifs_mount failed w/return code = -101
CIFS VFS: Error connecting to socket. Aborting operation
CIFS VFS: cifs_mount failed w/return code = -101
CIFS VFS: Error connecting to socket. Aborting operation
CIFS VFS: cifs_mount failed w/return code = -101
CIFS VFS: Error connecting to socket. Aborting operation
CIFS VFS: cifs_mount failed w/return code = -101
CIFS VFS: Error connecting to socket. Aborting operation
CIFS VFS: cifs_mount failed w/return code = -101
CIFS VFS: Error connecting to socket. Aborting operation
CIFS VFS: cifs_mount failed w/return code = -101
CIFS VFS: Error connecting to socket. Aborting operation
CIFS VFS: cifs_mount failed w/return code = -101
CIFS VFS: Error connecting to socket. Aborting operation
CIFS VFS: cifs_mount failed w/return code = -101
CIFS VFS: Error connecting to socket. Aborting operation
CIFS VFS: cifs_mount failed w/return code = -101
b44: eth0: Link is up at 100 Mbps, half duplex.
b44: eth0: Flow control is off for TX and off for RX.
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
wlan0: authenticate with AP 00:30:0a:cd:35:81
wlan0: authenticated
wlan0: associate with AP 00:30:0a:cd:35:81
wlan0: RX AssocResp from 00:30:0a:cd:35:81 (capab=0x451 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
CIFS VFS: cifs_mount failed w/return code = -6
CIFS VFS: cifs_mount failed w/return code = -6
eth0: no IPv6 routers present
Bridge firewalling registered
virbr0: starting userspace STP failed, starting kernel STP
wlan0: no IPv6 routers present
usbcore: registered new interface driver bcm5974
[drm:drm_mode_rmfb] *ERROR* tried to remove a fb that we didn't own
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
lo: Disabled Privacy Extensions
type=1305 audit(1263565077.621:23078): audit_enabled=0 old=1
auid=4294967295 ses=4294967295 subj=kernel res=1
[drm] TV-14: set mode NTSC 480i 0
[drm] TV-14: set mode NTSC 480i 0
CIFS VFS: cifs_mount failed w/return code = -6
CIFS VFS: cifs_mount failed w/return code = -6
CE: hpet increasing min_delta_ns to 15000 nsec
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky<maxk@xxxxxxxxxxxx>
device vnet0 entered promiscuous mode
virbr0: topology change detected, propagating
virbr0: port 1(vnet0) entering forwarding state
virbr0: port 1(vnet0) entering disabled state
device vnet0 left promiscuous mode
virbr0: port 1(vnet0) entering disabled state
device vnet0 entered promiscuous mode
virbr0: topology change detected, propagating
virbr0: port 1(vnet0) entering forwarding state
vnet0: no IPv6 routers present
virbr0: port 1(vnet0) entering disabled state
device vnet0 left promiscuous mode
virbr0: port 1(vnet0) entering disabled state
device vnet0 entered promiscuous mode
virbr0: topology change detected, propagating
virbr0: port 1(vnet0) entering forwarding state
vnet0: no IPv6 routers present
CE: hpet increasing min_delta_ns to 22500 nsec
virbr0: port 1(vnet0) entering disabled state
device vnet0 left promiscuous mode
virbr0: port 1(vnet0) entering disabled state
device vnet0 entered promiscuous mode
virbr0: topology change detected, propagating
virbr0: port 1(vnet0) entering forwarding state
virbr0: port 1(vnet0) entering disabled state
device vnet0 left promiscuous mode
virbr0: port 1(vnet0) entering disabled state
===========================================================
pm suspend log:
[kpyau@luesco ~]$ more /var/log/pm-suspend.log
Initial commandline parameters: --quirk-vbe-post
Fri Jan 15 21:08:38 MYT 2010: Running hooks for suspend.
/usr/lib/pm-utils/sleep.d/00auto-quirk suspend suspend: success.
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: Linux
luesco.bft.com.my 2.6.31.9-174.fc12.i686.PAE #1 SMP Mon Dec 21 06:04:56
UTC 2009 i686 i686 i386 GN
U/Linux
Module Size Used by
ipt_MASQUERADE 2788 1
iptable_nat 6068 1
nf_nat 18168 2 ipt_MASQUERADE,iptable_nat
bcm5974 7640 0
bridge 43992 0
stp 1988 1 bridge
llc 4960 2 bridge,stp
nls_utf8 1576 9
cifs 213000 10
coretemp 5924 0
sunrpc 158432 1
ipv6 239436 32
cpufreq_ondemand 6160 2
acpi_cpufreq 8848 0
fuse 52740 4
dm_multipath 14472 0
kvm_intel 39856 0
kvm 140236 1 kvm_intel
uinput 6852 0
snd_hda_codec_realtek 199204 1
snd_hda_intel 25192 5
snd_hda_codec 60584 2 snd_hda_codec_realtek,snd_hda_intel
arc4 1616 2
snd_hwdep 6900 1 snd_hda_codec
snd_seq 46960 0
snd_seq_device 6232 1 snd_seq
ecb 2492 2
snd_pcm 64932 3 snd_hda_intel,snd_hda_codec
iwl3945 97212 0
snd_timer 17992 2 snd_seq,snd_pcm
iTCO_wdt 10444 0
acer_wmi 14880 0
snd 50908 17
snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq,snd_seq_device,snd_pcm,snd_timer
iwlcore 143388 1 iwl3945
i2c_i801 10284 0
mac80211 149696 2 iwl3945,iwlcore
cfg80211 73044 3 iwl3945,iwlcore,mac80211
rfkill 16220 2 acer_wmi,cfg80211
b44 23196 0
ssb 37152 1 b44
iTCO_vendor_support 2812 1 iTCO_wdt
soundcore 5672 1 snd
wmi 5952 1 acer_wmi
serio_raw 5156 0
mii 4120 1 b44
snd_page_alloc 7892 2 snd_hda_intel,snd_pcm
joydev 9320 0
yenta_socket 23624 1
rsrc_nonstatic 10036 1 yenta_socket
i915 192208 2
drm_kms_helper 22700 1 i915
drm 136056 3 i915,drm_kms_helper
i2c_algo_bit 4820 1 i915
i2c_core 23352 4 i2c_i801,i915,drm,i2c_algo_bit
video 19088 1 i915
output 2468 1 video
total used free shared buffers cached
Mem: 2052804 785632 1267172 0 42112 294340
-/+ buffers/cache: 449180 1603624
Swap: 4112376 0 4112376
success.
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
/usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/98smart-kernel-video suspend suspend:
/usr/lib/pm-utils/sleep.d/98smart-kernel-video: line 37: add_parameter:
command not found
success.
/usr/lib/pm-utils/sleep.d/99hd-apm-restore.hook suspend suspend: saving
level 128 for device sda
success.
/usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0
success.
Fri Jan 15 21:08:39 MYT 2010: performing suspend
Fri Jan 15 21:42:23 MYT 2010: Awake.
Fri Jan 15 21:42:23 MYT 2010: Running hooks for resume
/usr/lib/pm-utils/sleep.d/99video resume suspend: VT_DISALLOCATE: Device
or resource busy
deallocvt: could not deallocate console 63
Returned exit code 1.
/usr/lib/pm-utils/sleep.d/99hd-apm-restore.hook resume suspend:
restoring level 128 for device sda
/dev/sda:
setting Advanced Power Management level to 0x80 (128)
APM_level = 128
success.
/usr/lib/pm-utils/sleep.d/98smart-kernel-video resume suspend: success.
/usr/lib/pm-utils/sleep.d/95led resume suspend: not applicable.
/usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
/usr/lib/pm-utils/sleep.d/90clock resume suspend: not applicable.
/usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
/usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend: success.
/usr/lib/pm-utils/sleep.d/49bluetooth resume suspend: not applicable.
/usr/lib/pm-utils/sleep.d/01grub resume suspend: not applicable.
/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
/usr/lib/pm-utils/sleep.d/00auto-quirk resume suspend: success.
--
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe: https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
