Thanks Sean; On Wed, 2006-12-20 at 00:13 -0800, Sean Bruno wrote: > On Tue, 2006-12-19 at 23:05 -0500, William Case wrote: > > Hi; > > > > I am getting the following line in dmesg: > > > > "bt878: probe of 0000.02:0d.1 failed with error -22" > > > > What is error -22? Where can I find a list of error messages that might > > appear in my log(s)? > Took me a minute to find the standard errnos, there is a bit of include > this, which includes this, which includes this etc... in the system > header files. > > If you look at /usr/include/asm-generic/errno.h > and /usr/include/asm-generic/errno-base.h it lists the system and > standard error numbers and what they correspond to. > I will save that answer. I didn't know were to even begin looking. Thanks! > An error with a negative value, i.e. -22, is not a valid value and is > really, really bad as it is indicative of something going seriously > awry(but you seem to already know that!). > I suspected the tuner was broken/dead. I will need a new one. I have just enough time to open the Christmas whine. -- Regards Bill
