On Wed, 2005-11-09 at 13:36 -0500, Ray Curtis wrote:
> On Wed, 2005-11-09 at 19:06 +0100, Tomasz Kłoczko wrote:
> > On Wed, 9 Nov 2005, Yuandan Zhang wrote:
> >
> > >
> > >>>
> > >>> You can open a terminal as that user and run
> > > my experience is that you press hotsync, with 1-2 seconds issue this
> > > command
> > >>> pilot-xfer -L -p /tmp/pilot
> > > good luck
> >
> > 1) run pilot-xfer before pressing hotsync button in my case generates
> > output:
> >
> > # pilot-xfer -L -p /dev/ttyUSB0
> > WARNING: You are using deprecated options. Use these instead:
> >
> > --rom instead of -F, --Flash
> > --with-os instead of -O, --OsFlash
> > --illegal instead of -I, --Illegal
> > --list --rom instead of -L, --List, --Listall
> >
>
> Try pilot-xfer --list -p /dev/ttyUSB0
> or
> pilot-xfer --list -p /dev/pilot
>
-- actully there are neither /dev/ttyUSB0 or /dev/pilot
so I simply used pilot-xfer --list -p /tmp/pilot
then hitting the hotsync got a conntected!
A list of the palm data passed ending with:
List complete. 186 files found.
but never synced with any app (evolution, etc.) If I was to move over
to jpilot, hit the sync button in jpilot, then hit the sync on the treo
it would sync fine, just getting picky now wanting to sync with
evolution! :)
>
> > *** buffer overflow detected ***: pilot-xfer terminated
> > ======= Backtrace: =========
> > /lib/libc.so.6(__chk_fail+0x41)[0x98dc15]
> > /lib/libc.so.6(__ptsname_r_chk+0x0)[0x98e254]
> > /usr/lib/libpisock.so.9[0x7a92f4f]
> > /usr/lib/libpisock.so.9(pi_bind+0x54)[0x7a9643c]
> > pilot-xfer[0x804ee6b]
> > pilot-xfer[0x804dc97]
> > /lib/libc.so.6(__libc_start_main+0xdf)[0x8c450f]
> > pilot-xfer[0x804a151]
> > ======= Memory map: ========
> > 0060a000-0060b000 r-xp 0060a000 00:00 0 [vdso]
> > 0061b000-00622000 r-xp 00000000 fd:01 1394957 /usr/lib/libpopt.so.0.0.0
> > 00622000-00623000 rwxp 00007000 fd:01 1394957 /usr/lib/libpopt.so.0.0.0
> > 007a8000-007c1000 r-xp 00000000 fd:01 671853 /lib/ld-2.3.90.so
> > 007c1000-007c2000 r-xp 00018000 fd:01 671853 /lib/ld-2.3.90.so
> > 007c2000-007c3000 rwxp 00019000 fd:01 671853 /lib/ld-2.3.90.so
> > 008af000-009d4000 r-xp 00000000 fd:01 673299 /lib/libc-2.3.90.so
> > 009d4000-009d6000 r-xp 00125000 fd:01 673299 /lib/libc-2.3.90.so
> > 009d6000-009d8000 rwxp 00127000 fd:01 673299 /lib/libc-2.3.90.so
> > 009d8000-009da000 rwxp 009d8000 00:00 0
> > 00b7e000-00b87000 r-xp 00000000 fd:01 673313 /lib/libgcc_s-4.0.2-20051007.so.1
> > 00b87000-00b88000 rwxp 00009000 fd:01 673313 /lib/libgcc_s-4.0.2-20051007.so.1
> > 07a70000-07aa2000 r-xp 00000000 fd:01 1393267 /usr/lib/libpisock.so.9.0.0
> > 07aa2000-07aa6000 rwxp 00031000 fd:01 1393267 /usr/lib/libpisock.so.9.0.0
> > 08048000-08052000 r-xp 00000000 fd:01 1345495 /usr/bin/pilot-xfer
> > 08052000-08054000 rw-p 00009000 fd:01 1345495 /usr/bin/pilot-xfer
> > 09c77000-09c98000 rw-p 09c77000 00:00 0 [heap]
> > b7fbd000-b7fbf000 rw-p b7fbd000 00:00 0
> > bfbc9000-bfbde000 rw-p bfbc9000 00:00 0 [stack]
> >
> > gdb back trace on above shows:
> >
> > (gdb) bt
> > #0 0x00916402 in __kernel_vsyscall ()
> > #1 0x001397e8 in raise () from /lib/libc.so.6
> > #2 0x0013af58 in abort () from /lib/libc.so.6
> > #3 0x0016ea3a in __libc_message () from /lib/libc.so.6
> > #4 0x001efc15 in __chk_fail () from /lib/libc.so.6
> > #5 0x001f0254 in __realpath_chk () from /lib/libc.so.6
> > #6 0x07a92f4f in pi_serial_bind (ps=0x884b760, addr=0xbf8087ea, addrlen=258) at /usr/include/bits/stdlib.h:35
> > #7 0x07a9643c in pi_bind (pi_sd=6, port=0x884b720 "/dev/ttyUSB0") at socket.c:1063
> > #8 0x0804ee6b in plu_connect () at userland.c:57
> > #9 0x0804dc97 in main (argc=4, argv=0xbf8091e4) at pilot-xfer.c:2511
> > #10 0x0012650f in __libc_start_main () from /lib/libc.so.6
> > #11 0x0804a151 in _start ()
> >
> > So probably something aroud pilot-xfer.c:2511 is broken.
> >
> > I was repor this on Fedora bugzilla (it was closed without fixing this as
> > not repeateable).
> > Anyone observes simillar effect ?
> >
> > 2) strace output shows that pilot-xfer tries connect with pilot using only
> > 9600b/s:
> >
> > open("/dev/ttyUSB0", O_RDWR|O_NONBLOCK) = 6
> > ioctl(6, SNDCTL_TMR_TIMEBASE or TCGETS, {B9600 -opost -isig -icanon -echo ...}) = 0
> > ioctl(6, SNDCTL_TMR_TIMEBASE or TCGETS, {B9600 -opost -isig -icanon -echo ...}) = 0
> > ioctl(6, SNDCTL_TMR_START or TCSETS, {B9600 -opost -isig -icanon -echo ...}) = 0
> > ioctl(6, SNDCTL_TMR_TIMEBASE or TCGETS, {B9600 -opost -isig -icanon -echo ...}) = 0
> > fcntl64(6, F_GETFL) = 0x802 (flags O_RDWR|O_NONBLOCK)
> > fcntl64(6, F_SETFL, O_RDWR) = 0
> > dup2(6, 4) = 4
> > close(6) = 0
> > ioctl(1, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0
> > fstat64(1, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 21), ...}) = 0
> > mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f51000
> > write(1, "\n", 1 ) = 1
> > write(1, " Listening for incoming connec"..., 56 Listening for
> > incoming connection on /dev/ttyUSB0... ) = 56
> > ioctl(4, SNDCTL_TMR_TIMEBASE or TCGETS, {B9600 -opost -isig -icanon -echo ...}) = 0
> > ioctl(4, SNDCTL_TMR_STOP or TCSETSW, {B9600 -opost -isig -icanon -echo ...}) = 0
> > ^^^^^
> > I supose this is root of all problems (IIRC older working version pilot-link
> > was using 115200b/s on my Visor connected via USB cradle).
> >
> > After timeout in strace output is emmited only repeating:
> >
> > select(5, [4], NULL, NULL, NULL) = 1 (in [4])
> > read(4, "", 10) = 0
> >
> > And seems pilot-xfer do not handles correctly situation when device
> > disapears from USB bus.
> >
> > kloczek
> > --
> > -----------------------------------------------------------
> > *Ludzie nie mają problemów, tylko sobie sami je stwarzają*
> > -----------------------------------------------------------
> > Tomasz Kłoczko, sys adm @zie.pg.gda.pl|*e-mail: kloczek@xxxxxxxxxxxxxxxxxx*
> > --
> > fedora-list mailing list
> > fedora-list@xxxxxxxxxx
> > To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
> --
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
>
>
--
.~.
/V\
// \\
/( )\
^`~'^
