On Wed, 2005-11-09 at 12:38 +1100, Yuandan Zhang wrote: > > > my experience is that you press hotsync, with 1-2 seconds issue this > > > command > > > > > pilot-xfer -L -p /tmp/pilot > > > good luck > > ---- > > that's been my experience too...I think he may have created some rules > > or permissions in udev that may be interfering though. > > > > Craig > I use /tmp/pilot as device for gpilot sync with evolution. It works nice > on address, tasks. But unable to sync calendar. I initailly copy > calendar from pilot to PC (to evolution) this worked. since, > sync calendar failed. here is the log on this failure: > > > > > gpilotd-Message: gnome-pilot 2.0.13 starting... > gpilotd-Message: compiled for pilot-link version 0.12.0-pre4 > gpilotd-Message: compiled with [VFS] [USB] [IrDA] [Network] > gpilotd-Message: Activating CORBA server > gpilotd-Message: bonobo_activation_active_server_register = 0 > gpilotd-Message: Watching Cradle (/tmp/pilot) > gpilotd-Message: Found 4766, 0001 > gpilotd-Message: Using net TRUE > gpilotd-Message: Found 0502, 0736 > gpilotd-Message: Using net TRUE > gpilotd-Message: Found 091e, 0004 > gpilotd-Message: Using net TRUE > gpilotd-Message: Found 082d, 0100 > gpilotd-Message: Using net FALSE > gpilotd-Message: Found 082d, 0200 > gpilotd-Message: Using net TRUE > gpilotd-Message: Found 082d, 0300 > gpilotd-Message: Using net TRUE > gpilotd-Message: Found 0c88, 0021 > gpilotd-Message: Using net TRUE > gpilotd-Message: Found 0830, 0001 > gpilotd-Message: Using net TRUE > gpilotd-Message: Found 0830, 0002 > gpilotd-Message: Using net TRUE > gpilotd-Message: Found 0830, 0003 > gpilotd-Message: Using net TRUE > gpilotd-Message: Found 0830, 0020 > gpilotd-Message: Using net TRUE > gpilotd-Message: Found 0830, 0031 > gpilotd-Message: Using net TRUE > gpilotd-Message: Found 0830, 0040 > gpilotd-Message: Using net TRUE > gpilotd-Message: Found 0830, 0050 > gpilotd-Message: Using net TRUE > gpilotd-Message: Found 0830, 0060 > gpilotd-Message: Using net TRUE > gpilotd-Message: Found 0830, 0061 > gpilotd-Message: Using net TRUE > gpilotd-Message: Found 0830, 0070 > gpilotd-Message: Using net TRUE > gpilotd-Message: Found 0830, 0080 > gpilotd-Message: Using net TRUE > gpilotd-Message: Found 04e8, 8001 > gpilotd-Message: Using net TRUE > gpilotd-Message: Found 04e8, 6601 > gpilotd-Message: Using net TRUE > gpilotd-Message: Found 054c, 0038 > gpilotd-Message: Using net TRUE > gpilotd-Message: Found 054c, 0066 > gpilotd-Message: Using net TRUE > gpilotd-Message: Found 054c, 0095 > gpilotd-Message: Using net TRUE > gpilotd-Message: Found 054c, 009a > gpilotd-Message: Using net TRUE > gpilotd-Message: Found 054c, 00c9 > gpilotd-Message: Using net TRUE > gpilotd-Message: Found 054c, 00da > gpilotd-Message: Using net TRUE > gpilotd-Message: Found 054c, 00e9 > gpilotd-Message: Using net TRUE > gpilotd-Message: Found 054c, 0144 > gpilotd-Message: Using net TRUE > gpilotd-Message: Found 054c, 0169 > gpilotd-Message: Using net TRUE > gpilotd-Message: Found 12ef, 0100 > gpilotd-Message: Using net TRUE > gpilotd-Message: setting PILOTRATE=57600 > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: Input/output error > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs > gpilotd-Message: setting PILOTRATE=57600 > gpilotd-Message: Cradle Cradle has 0 events > gpilotd-Message: Instantiating 1 conduits... > ecalconduit-Message: in calendar's conduit_get_gpilot_conduit > > gpilotd-Message: Instantiated 0 backup conduits, 0 file conduits, 1 > other conduits > gpilotd-Message: HotSync button pressed, synchronizing pilot > gpilotd-Message: Pilot ID is 500, name is MyPilot, owner is yuandan > gpilotd-Message: Pilot has 0 entries in restore queue > gpilotd-Message: Pilot has 0 entries in conduit queue > ecalconduit-Message: > --------------------------------------------------------- > > ecalconduit-Message: pre_sync: Calendar Conduit v.0.1.6 > ecalconduit-Message: Using > timezone: /softwarestudio.org/Olson_20011030_5/Australia/Sydney > > (gpilotd:6573): gpilotd-WARNING **: Synchronization failed! > gpilotd-Message: Synchronization ended > gpilotd-Message: setting PILOTRATE=57600 > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: Input/output error > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs > gpilotd-Message: setting PILOTRATE=57600 > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs > gpilotd-Message: setting PILOTRATE=57600 > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs > gpilotd-Message: setting PILOTRATE=57600 > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs > gpilotd-Message: setting PILOTRATE=57600 > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs > gpilotd-Message: setting PILOTRATE=57600 > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs > gpilotd-Message: setting PILOTRATE=57600 > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs > gpilotd-Message: setting PILOTRATE=57600 > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs > gpilotd-Message: setting PILOTRATE=57600 > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs > gpilotd-Message: setting PILOTRATE=57600 > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs > gpilotd-Message: setting PILOTRATE=57600 > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs > gpilotd-Message: setting PILOTRATE=57600 > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs > gpilotd-Message: setting PILOTRATE=57600 > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs > gpilotd-Message: setting PILOTRATE=57600 > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: Socket operation on > non-socket > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs > gpilotd-Message: Shutting down devices > gpilotd-Message: Rereading configuration... > gpilotd-Message: Watching Cradle (/tmp/pilot) > gpilotd-Message: setting PILOTRATE=57600 > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such file or > directory > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs > gpilotd-Message: setting PILOTRATE=57600 > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: Success > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs > gpilotd-Message: setting PILOTRATE=57600 > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs > gpilotd-Message: setting PILOTRATE=57600 > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs > gpilotd-Message: setting PILOTRATE=57600 > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs > gpilotd-Message: setting PILOTRATE=57600 > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs > gpilotd-Message: setting PILOTRATE=57600 > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs > gpilotd-Message: setting PILOTRATE=57600 > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs > gpilotd-Message: setting PILOTRATE=57600 > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs > gpilotd-Message: setting PILOTRATE=57600 > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs > gpilotd-Message: setting PILOTRATE=57600 > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs > gpilotd-Message: setting PILOTRATE=57600 > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs > gpilotd-Message: setting PILOTRATE=57600 > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs > gpilotd-Message: setting PILOTRATE=57600 > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs > gpilotd-Message: setting PILOTRATE=57600 > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs > gpilotd-Message: setting PILOTRATE=57600 > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: Success > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs > gpilotd-Message: setting PILOTRATE=57600 > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs > gpilotd-Message: setting PILOTRATE=57600 > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: No such process > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs > gpilotd-Message: setting PILOTRATE=57600 > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: Success > > (gpilotd:6573): gpilotd-WARNING **: pi_accept_to: timeout was 2 secs > gpilotd-Message: setting PILOTRATE=57600 > gpilotd-Message: Exiting (caught SIGTERM)... > > -- Well well, it's a new day. Tried that command again, pilot-xfer -L -p /tmp/pilot on initial startup, made a connection, showed everthing. Next since that worked, started jpilot, checked settings, made sure device was set to /tmp/pilot, synced and yep, worked like a charm! >From there, I went to evolution, hit the sync on the device and it just sat there. After that, tried to sync in jpilot again and it just hung. I am not sure on the differences on what uses what, but if I don't sync with evolution I can go back / forth in jpilot fine, so at least I have that, but if I have evo open / active and hit sync, it hangs and only switching to run level 3 then back to 5 allows me to sync with jpilot again. Just to make sure, the pilot settings are default, USB, 5 for timeout and 56000 for speed, are those correct? Thanks to all again, especially Craig for all the posts! Lance
