I've thought of that- DHCP on the routers doesn't handle the number of clients I have very well. I wanted my FC2 box to handle that as well. That being said it maybe my only solution. Thanks > On Tue, 2005-03-08 at 11:06 +0000, Paul Howarth wrote: >> Kevin Plew wrote: >> > The FC2 box is not acting as a router. I don't want all packets to go >> > through eth0 due to the load on the wireless router. The reason I want >> to >> > route through the 2 interfaces is to reduce the total load on each >> router. >> >> Right, I see. So the FC2 server is just a file/print/DNS/DHCP etc. >> server? >> >> So clients of 192.168.1.0/24 should be using 192.168.1.1 as their >> router/gateway and clients of 192.168.100.0/24 should be using >> 192.168.100.1 as their router/gateway. Since both of your wireless >> routers have interfaces on the 10.x.x.x network, they should be able to >> reach 10.10.11.50 without any additional routes. The only additional >> route entry you need is one via either eth0 or eth1 for the FC2 server >> itself. They key would seem to be to set up the DHCP server to assign >> the correct router to each network's clients. >> >> Paul. >> > Kevin, > > Since your server is not acting as a router, why not move it to the > switch between the Satellite broadband device and the Linksys routers. > A single interface into the network should be sufficient to serve your 2 > Wireless subnets and you would only need one route out of the server. > > Network diagram: > Proxy Server > ----10.10.11.50----- > | > | > | > Satellite Broadband Gateway > ---------10.11.57.1---------- > | > | > -----------Switch-------------------------------- > | | | > | | | > 10.11.57.2 10.11.57.3 server FC2 > Linksys wrt54g Linksys wrt54g 10.11.57.4 > wireless router wireless router > --192.168.1.1-- ---192.168.100.1----- > | | > | | > 192.168.1.0/24---- ----192.168.100.0/24---- > > Let the Linksys routers provide DHCP for the clients and they would also > be the clients' default routers. The Linksys routers probably act as > caching DNS servers as well. > > Bob... > > > > > > > -- > fedora-list mailing list > fedora-list@xxxxxxxxxx > To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list >
