I'm trying to setup 2 wireless networks being served by one server with 2
NICs. I need 2 wireless networks due to the number of subscibers. The
server will provide dhcp, dns and a proxy. The proxy is required by my
satellite provider. DHCP and DNS both work correctly, but the proxy is
only able to connect to the server @ 10.10.11.50 via eth0. eth1 will not
connect. I am able to route to eth0 but not to eth1. I have tried adding
the following to /etc/sysconfig:
network-scripts/route-eth0 containing 10.10.11.50 via 192.168.1.1
network-scripts/route-eth1 containing 10.10.11.50 via 192.168.100.1
The only route that shows up is the route via 192.168.1.1.
I have tried adding static routes, but then niether interface connected.
Is there any way to accomplish what I am trying to do?
netstat -r:
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt
Iface
192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
10.10.11.0 192.168.1.1 255.255.255.0 UG 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
Network diagram:
Proxy Server
----10.10.11.50-----
|
|
|
Satellite Broadband Gateway
---------10.11.57.1----------
|
|
-----------Switch-----------
| |
| |
10.11.57.2 10.11.57.3
Linksys wrt54g Linksys wrt54g
wireless router wireless router
--192.168.1.1-- ---192.168.100.1-----
| |
| |
192.168.1.0/24---- ----192.168.100.0/24----
| |
| |
| |
| |
eth1--server FC2--eth2
192.168.1.20 192.168.100.20
2 Proxy Clients- 1 serving 192.168.1.0/24
1 serving 192.168.100.0/24
