Hi all, It is my first message to this list. I'm working in packages to sistem independently (six-head), look my url: http://www.insignesoftware.com/produtos/sixsystem.php package download: http://oraculo.insignesoftware.com/current/Six-System/Six-2.0/ Happy Christmas to all. Regards Alexandre Penasso Teixeira Em Sex, 2004-12-17 às 13:50, Kim Lux escreveu: > I just set up dual monitor support with an Nvidia card in FC3. It uses > twinview. Yours is different. I don't see anything obviously wrong > with your setup. I've got a couple questions/suggestions: > > a) Are all the commands in your file supported by your video drivers ? > For example: xinerama and clone ? Or are these X commands and all cards > will support them ? > > b) Does that xorg.conf file boot up ? Which monitor views ? > > c) If it boots, I'd try to get each individual monitor running > individually before going to the dual head boot. Have you done that ? > > d) Once that works, can you run it in clone mode ? Ie can you get both > monitors to display the same thing ? > > d) Once you get that going, the next thing I'd look at is the "Viewport" > numbers. I'm not sure that they are needed/correct. Another place to > look at the viewport numbers is by right clicking on the desktop-> > configure desktop -> display -> multiple monitors > > I'd also look at the README that Nvidia has with their drivers. It has > suggestions for difficult circumstances, ie older monitors, etc. that > might be helpful. > > See my nvidia twinview xorg.conf file below. This isn't a perfect > setup, ie it could be improved, but it works pretty well. > > Hope this helps. > > > # Xorg.conf as manually prepared by Kim Lux > # Supports dual monitors on HP ZD7000 laptop > # Uses the Nvidia GeForce FX Go5700 video card > # as present in an HP zd7000 laptop. It drives > # the internal 17" LCD as the first monitor at 1680x150. > # It drives a Dell FPW2005 20 inch LCD at 1680x 1050 > # as the second monitor > > > #******************************************************************************************* > # Files Section > #******************************************************************************************* > > Section "Files" > > # RgbPath is the location of the RGB database. Note, this is the name > of the > # file minus the extension (like ".txt" or ".db"). There is normally > # no need to change the default. > # Multiple FontPath entries are allowed (they are concatenated together) > # By default, Red Hat 6.0 and later now use a font server independent of > # the X server to render fonts. > RgbPath "/usr/X11R6/lib/X11/rgb" > FontPath "unix/:7100" > EndSection > > > > #******************************************************************************************* > # Module section > #******************************************************************************************* > Section "Module" > Load "dbe" # Double buffering > Load "extmod" > Load "fbdevhw" > Load "glx" > Load "record" > Load "freetype" > Load "type1" > Load "synaptics" # Touchpad driver > > EndSection > > > #******************************************************************************************* > # Input device section > #******************************************************************************************* > Section "InputDevice" > Identifier "Keyboard0" > Driver "kbd" > Option "XkbModel" "pc105" > Option "XkbLayout" "us" > EndSection > > Section "InputDevice" > Identifier "Mouse0" > Driver "mouse" > Option "Protocol" "IMPS/2" > Option "Device" "/dev/input/mice" > Option "ZAxisMapping" "4 5" > Option "Emulate3Buttons" "yes" > EndSection > > Section "InputDevice" > Identifier "Synaptics" > Driver "synaptics" > Option "Device" "/dev/input/mice" > Option "Protocol" "auto-dev" > Option "Emulate3Buttons" "yes" > EndSection > > #******************************************************************************************* > # Monitor section > #******************************************************************************************* > > Section "Monitor" > Identifier "Monitor0" > VendorName "Generic" > ModelName "Flat Panel 1680x1050" > HorizSync 31.5-90 > VertRefresh 60 > Modeline "1680x1050" 147.14 1680 1784 1968 2256 1050 1051 1054 > 1087 > Option "dpms" > EndSection > > Section "Monitor" > Identifier "Monitor1" > VendorName "Generic" > ModelName "Flat Panel 1680x1050" > HorizSync 31.5-90 > VertRefresh 60 > Modeline "1680x1050" 147.14 1680 1784 1968 2256 1050 1051 1054 > 1087 > Option "dpms" > EndSection > > > #******************************************************************************************* > # Graphics device section > #******************************************************************************************* > Section "Device" > Identifier "Device0" > VendorName "nVidia Corporation" > BoardName "NVIDIA GeForce FX (generic)" > Driver "nvidia" > Option "DPMS" > Option "MetaModes" "1680x1050,1680x1050" > > Option "TVStandard" "NTSC-M" > Option "CursorShadow" "0" > #Option "IgnoreEDID" "1" > Option "NoLogo" "0" > Option "NvAGP" "1" > #Option "renderAccel" "1" > # Option "HWCursor" "1" > Option "SWCursor" "1" > #Option "DigitalVibrance" "0" > > Option "TwinView" "1" > Option "SecondMonitorVertRefresh" "50-160" > Option "SecondMonitorHorizSync" "30-70" > Option "TwinViewOrientation" "RightOf" > > EndSection > > #******************************************************************************************* > # Screens section > #******************************************************************************************* > > Section "Screen" > Identifier "Screen0" > Device "Device0" > Monitor "Monitor0" > DefaultDepth 24 > SubSection "Display" > Viewport 0 0 > Depth 16 > Modes "800x600" "640x480" > EndSubSection > SubSection "Display" > Viewport 0 0 > Depth 24 > Modes "1680x1050" "1280x1024" "1280x960" "1024x768" "800x600" > "640x480" > EndSubSection > EndSection > > Section "Screen" > Identifier "Screen1" > Device "Device0" > Monitor "Monitor1" > DefaultDepth 24 > SubSection "Display" > Viewport 0 0 > Depth 16 > Modes "800x600" "640x480" > EndSubSection > SubSection "Display" > Viewport 0 0 > Depth 24 > Modes "1680x1050" "1280x1024" "1280x960" "1024x768" "800x600" > "640x480" > EndSubSection > EndSection > > > > > #******************************************************************************************* > # Server Layout Section > #******************************************************************************************* > > > Section "ServerLayout" > Identifier "Dual head configuration" > Screen 0 "Screen0" LeftOf "Screen1" > Screen 1 "Screen1" 0 0 > InputDevice "Mouse0" "CorePointer" > InputDevice "Keyboard0" "CoreKeyboard" > InputDevice "Synaptics" "AlwaysCore" > #Option "Clone" "on" > EndSection > > #******************************************************************************************* > Section "DRI" > Group 0 > Mode 0666 > EndSection > > > > > -- > Kim Lux, Diesel Research Inc. >
