Jeff Vian wrote:
On Wed, 2004-09-15 at 19:54, Temlakos wrote:I have an emu10k1/Audigy setup and it never had sound at a reboot/log out/Ctl-Alt/B-space,
On Wed, 2004-09-15 at 20:48, Lorn Miller wrote:
Temlakos
When I installed FC2 (On a Gateway 2k system), the test sound didn't work. When I started the audio mixer, I found that all the volume controls were all the way down. Once I turned those up, it worked fine.
I hope it's something this simple, I know I would hate to go without my audio.
good luck
Lorn Miller
Unfortunately, it's not so simple. Even when I run the sliders all the way up, the sound stays stubbornly off.
TAH
In one case I had to use alsamixer to set it's sliders up, then also ran aumix to set it's sliders up before I could get sound to work.
Maybe that is the root of your problem.
BTW, the test sound does not use the mixer settings so it should work regardless as long as the speakers are properly connected and turned up themselves. Have you checked that?
I found that a default setting in the mixers - alsamixer;gnome-alsamixer;kmix;aumix labeled
'Audigy Analog/Digital Output Jack' if checked=no sound;unchecked=sound,I don't know if
SBLive has any similar settings but its worth experimenting with.
david
