On 05/27/2010 09:48 AM, Tom Diehl wrote: > Hi, > > I have a new seagate external USB disk that does not mount when plugged in > to my F-12 machine. I can mount it by hand and access it normally. > > Does anyone have instructions for adding udev rules or whatever it takes > to get this to automount when plugged in? > > dmesg shows the following: > usb 1-3: new high speed USB device using ehci_hcd and address 4 > usb 1-3: New USB device found, idVendor=0bc2, idProduct=3300 > usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > usb 1-3: Product: Desktop > usb 1-3: Manufacturer: Seagate > usb 1-3: SerialNumber: 2GHL7D7A > usb 1-3: configuration #1 chosen from 1 choice > ata6: SATA link down (SStatus 0 SControl 300) > > lsusb -v shows the following: > > Bus 001 Device 004: ID 0bc2:3300 Seagate RSS LLC > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 2.00 > bDeviceClass 0 (Defined at Interface level) > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 64 > idVendor 0x0bc2 Seagate RSS LLC > idProduct 0x3300 > bcdDevice 1.30 > iManufacturer 1 Seagate > iProduct 2 Desktop > iSerial 3 2GHL7D7A > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 32 > bNumInterfaces 1 > bConfigurationValue 1 > iConfiguration 0 > bmAttributes 0xc0 > Self Powered > MaxPower 2mA > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 8 Mass Storage > bInterfaceSubClass 6 SCSI > bInterfaceProtocol 80 Bulk (Zip) > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 EP 1 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0200 1x 512 bytes > bInterval 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x02 EP 2 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0200 1x 512 bytes > bInterval > Device Qualifier (for other device speed): > bLength 10 > bDescriptorType 6 > bcdUSB 2.00 > bDeviceClass 0 (Defined at Interface level) > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 64 > bNumConfigurations 1 > Device Status: 0x0001 > Self Powered > > Should I file this in bugzilla? > > Regards, > > What does /var/log/messages say? I find that the whole automount process under F12 to be very hit and miss. I have external Seagate drives and I have noticed that sometimes they get automounted and other times they don't. Sometimes they don't get automounted after a reboot of the system, but then do get automounted when I login via the graphical interface, and sometimes I have to manually mount them after I login. Since the behavior is so inconsistent I've never filed a bug against it. Most of the time though it does work. Paolo -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
