Hi; Can someone assist me with the interpretation of the provided data and how to proceed with getting pulseaudio working? Thanks, Ken Wolcott On Tue, Mar 2, 2010 at 22:17, Kenneth Wolcott <kennethwolcott@xxxxxxxxx> wrote: > Hi Don; > >> Here's what I used to find my problem, in addition to making sure I >> found the correct hardware and software versions: >> >> lsmod | grep snd >> lspci | grep Audio >> cat /proc/asound/cards >> aplay -L >> pulseaudio --dump-config >> >> Bugzilla (in particular, https://bugzilla.redhat.com/show_bug.cgi?id=544654) >> >> -Don > > Thanks for your reply. > > How do I interpret the following information divulged by the commands > you suggested that I run? > > #!/bin/bash -xv > > lsmod | grep snd > + lsmod > + grep snd > snd_hda_codec_realtek 199204 1 > snd_hda_codec_intelhdmi 12468 1 > snd_hda_intel 25096 4 > snd_hda_codec 60584 3 > snd_hda_codec_realtek,snd_hda_codec_intelhdmi,snd_hda_intel > snd_hwdep 6900 1 snd_hda_codec > snd_seq 46960 0 > snd_seq_device 6232 1 snd_seq > snd_pcm 64772 3 snd_hda_intel,snd_hda_codec > snd_timer 17992 2 snd_seq,snd_pcm > snd 50908 16 > snd_hda_codec_realtek,snd_hda_codec_intelhdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq,snd_seq_device,snd_pcm,snd_timer > soundcore 5672 1 snd > snd_page_alloc 7832 2 snd_hda_intel,snd_pcm > > lspci | grep Audio > + lspci > + grep Audio > 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High > Definition Audio Controller (rev 01) > > cat /proc/asound/cards > + cat /proc/asound/cards > 0 [Intel ]: HDA-Intel - HDA Intel > HDA Intel at 0xf2500000 irq 16 > > aplay -L > + aplay -L > default > Default > front:CARD=Intel,DEV=0 > HDA Intel, ALC887 Analog > Front speakers > surround40:CARD=Intel,DEV=0 > HDA Intel, ALC887 Analog > 4.0 Surround output to Front and Rear speakers > surround41:CARD=Intel,DEV=0 > HDA Intel, ALC887 Analog > 4.1 Surround output to Front, Rear and Subwoofer speakers > surround50:CARD=Intel,DEV=0 > HDA Intel, ALC887 Analog > 5.0 Surround output to Front, Center and Rear speakers > surround51:CARD=Intel,DEV=0 > HDA Intel, ALC887 Analog > 5.1 Surround output to Front, Center, Rear and Subwoofer speakers > surround71:CARD=Intel,DEV=0 > HDA Intel, ALC887 Analog > 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers > iec958:CARD=Intel,DEV=0 > HDA Intel, ALC887 Digital > IEC958 (S/PDIF) Digital Audio Output > hdmi:CARD=Intel,DEV=0 > HDA Intel, INTEL HDMI > HDMI Audio Output > > pulseaudio --dump-conf > + pulseaudio --dump-conf > ### Read from configuration file: /etc/pulse/daemon.conf ### > daemonize = no > fail = yes > high-priority = yes > nice-level = -11 > realtime-scheduling = yes > realtime-priority = 5 > allow-module-loading = yes > allow-exit = yes > use-pid-file = yes > system-instance = no > cpu-limit = no > enable-shm = yes > flat-volumes = yes > lock-memory = no > exit-idle-time = 20 > scache-idle-time = 20 > dl-search-path = /usr/lib/pulse-0.9.21/modules > default-script-file = /etc/pulse/default.pa > load-default-script-file = yes > log-target = auto > log-level = notice > resample-method = auto > enable-remixing = yes > enable-lfe-remixing = no > default-sample-format = s16le > default-sample-rate = 44100 > default-sample-channels = 2 > default-channel-map = front-left,front-right > default-fragments = 4 > default-fragment-size-msec = 25 > shm-size-bytes = 0 > log-meta = no > log-time = no > log-backtrace = 0 > rlimit-fsize = -1 > rlimit-data = -1 > rlimit-stack = -1 > rlimit-core = -1 > rlimit-rss = -1 > rlimit-as = -1 > rlimit-nproc = -1 > rlimit-nofile = 256 > rlimit-memlock = -1 > rlimit-locks = -1 > rlimit-sigpending = -1 > rlimit-msgqueue = -1 > rlimit-nice = 31 > rlimit-rtprio = 9 > rlimit-rttime = 1000000 > > Thanks, > Ken Wolcott > -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
