On Sat, 2008-02-23 at 20:52 -0500, Mark C. Allman wrote: > OK, something else that's broken in F8. > > At some point in the past when we'd plug in a Treo 700p USB cable to > hotsync (which occasionally actually worked), devices /dev/ttyUSB0 > and /dev/ttyUSB1 were created to access the phone. Now when I plug it > in I only see lines like: > Feb 23 15:35:26 prez kernel: usb 3-1: new full speed USB device > using uhci_hcd and address 3 > Feb 23 15:35:26 prez kernel: usb 3-1: configuration #1 chosen from > 1 choice > When I plug in my Verizon broadband wireless USB modem I see ttyUSB0 and > ttyUSB1 created, but no longer for the Treo. > > Any ideas/hints on why the tty devices are no longer created? ---- did you... cp /usr/share/pilot-link/udev/60-libpisock.rules /etc/udev/rules also note that the actual ports used /dev/ttyUSBx are less important because it should automatically create a linked device /dev/pilot and that would be what you want to use Craig
