Mike Wright wrote:
Gary Schlachter wrote:
Mike Wright wrote:
Gary Schlachter wrote:
Mike Wright wrote:
Gary Schlachter wrote:
I am trying to use PXE/kickstart to load FC7 on an appliance.
My initrd.img and vmlinuz are from FC7 and are loading but my
console output looks like the following:
<big snip />
Switching to new root and running init.
umounting old /dev
umounting old /proc
umounting old /sys
switchroot: mount failed: No such file or directory
Booting has failed.
Kernel panic - not syncing: Attempted to kill init!
Any and all thoughts would be greatly appreciated!
Hi Gary,
I'll take a stab at it.
I nfs install f7 using pxeboot and kickstart. I seem to remember
struggling with something similar. It turned out that in the
pxeboot stanza I had broken the APPEND line using "\". Big
no-no. The "\" is for readability. The APPEND line and all its
options must be on a single line. Once I'd done that it worked
correctly.
If that doesn't solve the problem would you post your pxeboot
stanza? Might be a clue there.
hth,
Mike Wright :m)
I finally got my initrd.img to load. I found a post about changing
the init script in the initrd.img from
mount /sysroot
to
mount -o defaults --ro -t ext3 /dev/VolGroup00/LogVol00 /sysroot
and that did the trick. However now my kickstart file is not being
used. My pxelinux.xfg/default looks like
label linux
kernel vmlinuz
append initrd=initrd.fc7.img
ks=nfs:10.254.13.1:/home/tftpboot/kickstart/10.254.13.112-kickstart
ramdisk_size=9216
I have tried with and without the ksdevice=eth0 on the "append"
line as well. It is like the "ks=" is being ignored by the kernel
alotugh I can see it as a kernel option on the console.
Hmmm, couple possibilities:
Is the nfs server running and has the kickstart file been exported?
Is that machine running iptables and are the required nfs ports open?
When I was trying to debug my setup tcpdump was definitely my best
friend.
Yes to all since I am able to boot other systems with FC1 from the
same setup. My PXE prompt has multiple options one of which is
Fedora Core 1 and another is Fedora Core 7.
Our APPEND lines are very different. Here's mine:
APPEND ksdevice=eth0 load_ramdisk=1 initrd=images/fc7-install.img
network ks=nfs:lan51:/opt/fc7/ks.cfg
My default file looks like below with no line breaks:
prompt 1
default linux
timeout 100
label linux
kernel vmlinuz
append ksdevice=eth0 load_ramdisk=1 initrd=initrd.fc7.img network
ks=nfs:10.254.13.1:/home/tftpboot/kickstart/10.254.13.112-kickstart
ramdisk_size=9216
When I get to the boot line, I type "linux". The vmlinuz and
initrd.fc7.img are loaded. Then a "Ready" message appears. Then the
system boots with Fedora Core 7. Is there any way I could try your
fc7-install.img? I still wonder if that is where my problem lies.
Thanks,
Gary
