John wrote: > Jan Welker wrote: >> Dear List, >> >> Yesterday evening I had a power outage in my office. My workstation >> lost power. After the power was back I tried to start it again. The >> result was a reboot loop. >> If I switch it on I get no screen, no beep. The fans and the disks are >> spinning (normal start up sounds). After 5 seconds it switches off and >> does the same again. It is for sure a hardware problem. >> Any idea what component is broken (motherboard, power supply or RAM)? >> >> Thanks, >> Jan > I have seen similar behavior, and it almost always means that the power > supply has failed. > > I second this - with no POST beep at all, the CPU is not starting. From the sounds of things, you are getting the some power for the drive, but with the drive spinning up, and then back down again, you may not be getting the proper power to either spin it up to full speed, or to run the electronics. It is also possible that you have a fried drive as well as your other problems. If at all possible, take the system apart and test each part separately. I would not be surprised if there was a power surge just before the power went out, or as it came back on. It is possible that this surge managed to damage more then one part of the system. A power supply dieing because of a surge may spike one or more outputs - it is not supposed to happen, but you never know. There power supplies used to come with a built in surge suppressor, but they seem to be rare now days in any but the high-end supplies. Mikkel -- Do not meddle in the affairs of dragons, for thou art crunchy and taste good with Ketchup!
Attachment:
signature.asc
Description: OpenPGP digital signature
