On Sat, 2007-09-15 at 01:01 -0400, Neil Cherry wrote: > Gregory P. Ennis wrote: > > On Fri, 2007-09-14 at 23:14 -0400, Neil Cherry wrote: > >> Gregory P. Ennis wrote: > >>> Everyone, > >>> > >>> I am trying to intall a couple Multtech Modems on a F6 system and am > >>> having difficulty finding a starting place. I would like to try my hand > >>> with some faxing software, but have not been able to get to the modems. > >>> > >>> When I run lsusb I get the following: > >>> > >>> > >>> Bus 002 Device 003: ID 06e0:f107 Multi-Tech Systems, Inc. > >>> MT5634ZBA-USB-V92 MultiModemUSB > >>> Bus 002 Device 001: ID 0000:0000 > >>> Bus 002 Device 002: ID 058f:9360 Alcor Micro Corp. > >>> Bus 003 Device 001: ID 0000:0000 > >>> Bus 001 Device 001: ID 0000:0000 > >>> Bus 001 Device 003: ID 06e0:f107 Multi-Tech Systems, Inc. > >>> MT5634ZBA-USB-V92 MultiModemUSB > >>> > >>> When I do a ls /dev/usb* I get the following: > >>> > >>> crw------- 1 root root 253, 0 Sep 14 19:22 usbdev1.1_ep00 > >>> crw------- 1 root root 253, 1 Sep 14 19:22 usbdev1.1_ep81 > >>> crw------- 1 root root 253, 6 Sep 14 19:22 usbdev1.3_ep00 > >>> crw------- 1 root root 253, 8 Sep 14 19:22 usbdev1.3_ep02 > >>> crw------- 1 root root 253, 7 Sep 14 19:22 usbdev1.3_ep84 > >>> crw------- 1 root root 253, 9 Sep 14 19:22 usbdev1.3_ep86 > >>> crw------- 1 root root 253, 2 Sep 14 19:22 usbdev2.1_ep00 > >>> crw------- 1 root root 253, 3 Sep 14 19:22 usbdev2.1_ep81 > >>> crw------- 1 root root 253, 10 Sep 14 19:22 usbdev2.2_ep00 > >>> crw------- 1 root root 253, 11 Sep 14 19:22 usbdev2.2_ep01 > >>> crw------- 1 root root 253, 12 Sep 14 19:22 usbdev2.2_ep82 > >>> crw------- 1 root root 253, 13 Sep 14 19:50 usbdev2.3_ep00 > >>> crw------- 1 root root 253, 15 Sep 14 19:50 usbdev2.3_ep02 > >>> crw------- 1 root root 253, 14 Sep 14 19:50 usbdev2.3_ep84 > >>> crw------- 1 root root 253, 16 Sep 14 19:50 usbdev2.3_ep86 > >>> crw------- 1 root root 253, 4 Sep 14 19:22 usbdev3.1_ep00 > >>> crw------- 1 root root 253, 5 Sep 14 19:22 usbdev3.1_ep81 > >>> > >>> > >>> Can any of you point me to a tutorial as to how to connect these modems > >>> and access them on Linux. I have a SCO box which uses > >>> regular /dev/tty1a devices, but I have not had any experience with usb > >>> ports. I do not know how to connect the information supplied by lsusb > >>> with the /dev/usbdev* > >>> > >>> Thanks for your help!!! > >>> > >>> Greg Ennis > >>> > >> Do a cat /proc/bus/usb/devices then a /proc/devices. > >> > >> -- > > > > Neil, > > > > thanks for your help but I am not sure what to do with it, sorry for an > > entry level question > > > sine I wasn't sure what to expect I couldn't tell you what to look > for. The above usbdev3.1_ep** sounds like devices that libusb or libhid > would use (can't use those with minicom or other comm programs). > > > cat /proc/bus/usb/devices : > > > > T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 > > D: Ver= 1.00 Cls=02(comm.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 2 > > P: Vendor=06e0 ProdID=f107 Rev= 1.00 > > S: Manufacturer=Multi-Tech Systems, Inc. > > S: Product=MultiModemUSB > > C: #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=400mA > > I: If#= 0 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=ff Prot=ff Driver= > > I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver= > > E: Ad=02(O) Atr=02(Bulk) MxPS= 16 Ivl=0ms > > E: Ad=84(I) Atr=03(Int.) MxPS= 63 Ivl=2ms > > Looks like not driver there. > > C:* #Ifs= 2 Cfg#= 2 Atr=a0 MxPwr=400mA > > I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=cdc_acm > > E: Ad=84(I) Atr=03(Int.) MxPS= 32 Ivl=128ms > > I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm > > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > Looks like driver cdc_acm > > > > cat /proc/devices > > > > Character devices: > > 1 mem > > 4 /dev/vc/0 > > 4 tty > > 4 ttyS > > 5 /dev/tty > > 5 /dev/console > > 5 /dev/ptmx > > 6 lp > > 7 vcs > > 10 misc > > 13 input > > 14 sound > > 21 sg > > 29 fb > > 89 i2c > > 116 alsa > > 128 ptm > > 136 pts > > 166 ttyACM > > I'm guessing that this is the device attached to the about driver > You may find some additional information with dmesg. > > > 171 ieee1394 > > 180 usb > > 189 usb_device > > 202 cpu/msr > > 203 cpu/cpuid > > 216 rfcomm > > 226 drm > > 252 blktap > > 253 usb_endpoint > > 254 pcmcia > > try /dev/ttyACM > > -- > Linux Home Automation Neil Cherry ncherry@xxxxxxxxxxx > http://www.linuxha.com/ Main site > http://linuxha.blogspot.com/ My HA Blog > Author of: Linux Smart Homes For Dummies > Look for messages in /var/log/messages when you plug your modem in that describe what ttyUSB? device is created. Your fax software (or whatever) would then talk to that tty device. -- Mark C. Allman, PMP -- Allman Professional Consulting, Inc. -- www.allmanpc.com, 617-947-4263 BusinessMsg -- the secure, managed, J2EE/AJAX Enterprise IM/IC solution
