On Fri, 2007-09-14 at 23:14 -0400, Neil Cherry wrote: > Gregory P. Ennis wrote: > > Everyone, > > > > I am trying to intall a couple Multtech Modems on a F6 system and am > > having difficulty finding a starting place. I would like to try my hand > > with some faxing software, but have not been able to get to the modems. > > > > When I run lsusb I get the following: > > > > > > Bus 002 Device 003: ID 06e0:f107 Multi-Tech Systems, Inc. > > MT5634ZBA-USB-V92 MultiModemUSB > > Bus 002 Device 001: ID 0000:0000 > > Bus 002 Device 002: ID 058f:9360 Alcor Micro Corp. > > Bus 003 Device 001: ID 0000:0000 > > Bus 001 Device 001: ID 0000:0000 > > Bus 001 Device 003: ID 06e0:f107 Multi-Tech Systems, Inc. > > MT5634ZBA-USB-V92 MultiModemUSB > > > > When I do a ls /dev/usb* I get the following: > > > > crw------- 1 root root 253, 0 Sep 14 19:22 usbdev1.1_ep00 > > crw------- 1 root root 253, 1 Sep 14 19:22 usbdev1.1_ep81 > > crw------- 1 root root 253, 6 Sep 14 19:22 usbdev1.3_ep00 > > crw------- 1 root root 253, 8 Sep 14 19:22 usbdev1.3_ep02 > > crw------- 1 root root 253, 7 Sep 14 19:22 usbdev1.3_ep84 > > crw------- 1 root root 253, 9 Sep 14 19:22 usbdev1.3_ep86 > > crw------- 1 root root 253, 2 Sep 14 19:22 usbdev2.1_ep00 > > crw------- 1 root root 253, 3 Sep 14 19:22 usbdev2.1_ep81 > > crw------- 1 root root 253, 10 Sep 14 19:22 usbdev2.2_ep00 > > crw------- 1 root root 253, 11 Sep 14 19:22 usbdev2.2_ep01 > > crw------- 1 root root 253, 12 Sep 14 19:22 usbdev2.2_ep82 > > crw------- 1 root root 253, 13 Sep 14 19:50 usbdev2.3_ep00 > > crw------- 1 root root 253, 15 Sep 14 19:50 usbdev2.3_ep02 > > crw------- 1 root root 253, 14 Sep 14 19:50 usbdev2.3_ep84 > > crw------- 1 root root 253, 16 Sep 14 19:50 usbdev2.3_ep86 > > crw------- 1 root root 253, 4 Sep 14 19:22 usbdev3.1_ep00 > > crw------- 1 root root 253, 5 Sep 14 19:22 usbdev3.1_ep81 > > > > > > Can any of you point me to a tutorial as to how to connect these modems > > and access them on Linux. I have a SCO box which uses > > regular /dev/tty1a devices, but I have not had any experience with usb > > ports. I do not know how to connect the information supplied by lsusb > > with the /dev/usbdev* > > > > Thanks for your help!!! > > > > Greg Ennis > > > > Do a cat /proc/bus/usb/devices then a /proc/devices. > > -- Neil, thanks for your help but I am not sure what to do with it, sorry for an entry level question Greg cat /proc/bus/usb/devices : T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=02(comm.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 2 P: Vendor=06e0 ProdID=f107 Rev= 1.00 S: Manufacturer=Multi-Tech Systems, Inc. S: Product=MultiModemUSB C: #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=400mA I: If#= 0 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=ff Prot=ff Driver= I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver= E: Ad=02(O) Atr=02(Bulk) MxPS= 16 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 63 Ivl=2ms C:* #Ifs= 2 Cfg#= 2 Atr=a0 MxPwr=400mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=cdc_acm E: Ad=84(I) Atr=03(Int.) MxPS= 32 Ivl=128ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms cat /proc/devices Character devices: 1 mem 4 /dev/vc/0 4 tty 4 ttyS 5 /dev/tty 5 /dev/console 5 /dev/ptmx 6 lp 7 vcs 10 misc 13 input 14 sound 21 sg 29 fb 89 i2c 116 alsa 128 ptm 136 pts 166 ttyACM 171 ieee1394 180 usb 189 usb_device 202 cpu/msr 203 cpu/cpuid 216 rfcomm 226 drm 252 blktap 253 usb_endpoint 254 pcmcia Block devices: 1 ramdisk 7 loop 8 sd 9 md 22 ide1 65 sd 66 sd 67 sd 68 sd 69 sd 70 sd 71 sd 128 sd 129 sd 130 sd 131 sd 132 sd 133 sd 134 sd 135 sd 253 device-mapper 254 mdp
