Hi...
I am configuring a Network booting Diskless Cluster,
all is ok until fedora starts... Fedora 7 gets stucked
when loading the udev service... Any ideas about how
to solve this issue?
Here is my pxelinux configuration (kernelcomp_bzimage
boot)
# Perform a local boot by default
#default linux
default kernelcomp_bzimage
#default kernelcomp
#default install_fedora # OK!
#default netboot
# Always prompt
prompt 1
display pxeboot.msg
# Boot automatically after 30 seconds in tenths of a
second
timeout 30
localboot 0
label linux
kernel vmlinuz
# append initrd=initrd.img
nfsroot=172.16.39.49:/opt/diskless/root/ ip=dhcp rw
ramdisk_blocksize=1024 selinux=0
append initrd=initrd.img init=disklessrc
root=/dev/ram0 ramdisk_blocksize=1024
ramdisk_size=25356
NFSROOT=172.16.39.49:/opt/diskless/root \
SNAPSHOT=unichrome ip=dhcp selinux=0 rw ETHERNET=eth0
noapic acpi=off #load_ramdisk=1
label system-netboot
kernel linux-install/kitsune/vmlinuz
append
initrd=linux-install/kitsune/initrd.img root=/dev/ram0
init=disklessrc NFSROOT=172.16.39.49:/opt/diskless
ramdisk_size=25356 ETHERNET=eth0 SNAPSHOT=Node03
label kernelcomp
kernel vmlinuz-2.6.22.1
append
nfsroot=192.168.0.2:/srv/netboot/imagen_fedora7
ramdisk_blocksize=1024 ip=dhcp #
initrd=initrd-2.6.22.1.img ramdisk_size=25356 rw
noapic acpi=off
label kernelcomp_bzimage
kernel bzImage
append
nfsroot=192.168.0.2:/srv/netboot/imagen_fedora7
ramdisk_blocksize=1024 ip=dhcp ETHERNET=eth0
#console=/boot.txt #root=/dev/nfs init=/sbin/init #
selinux=0 noapic acpi=off
label install_fedora
kernel vmlinuz-pxe-fc7
append initrd=initrd-pxe-fc7.img
label netboot
kernel vmlinuz
append initrd=initrd.img
nfsroot=172.16.39.49:/srv/netboot/imagen_fedora7
root=/dev/sda1 ramdisk_blocksize=1024
ramdisk_size=8000000 selinux=0
Beforehand thanks...
___________________________________________________________
Yahoo! Answers - Got a question? Someone out there knows the answer. Try it
now.
http://uk.answers.yahoo.com/
