On Thu, 2006-12-21 at 09:59 -0500, Joe Smith wrote: > Les wrote: > > If the ports are on a bus board, check that it is seated well. ... > > Nope--on the MB. > > > ... Some boards also have a fuse on the board. It may have blown. > > Interesting--never seen that. What should I look for? The usual glass > tube or something smaller? > > <Joe > The ones I have seen use what looks like surface mount zero ohm resistor (like a small square of ceramic surface mounted to the board.), but marked as "F1" or Fuse or in one case Fuze. I have only seen this about 5 times total, though, so do not know if this has gone away in newer hardware. Unfortunately I never checked the PCB identity, so I have no idea of which manufacturer(s) these may have been. Regards, Les H
