On Mon, 2006-12-04 at 21:26 +0000, James Wilkinson wrote: > Have you checked the BIOS to see if that has any temperature sensors? Yes I have. The temps and voltages look fine, even right after the server shuts down, like when I boot it up afterwards. > You could -- carefully! -- try touching the heatsink to see how hot that > gets. If it gets too hot to touch, something's wrong. (Hint: touch it > occasionally while it's running -- it will be cold just after > power-on...) As a bonus, you'll get to watch the fans spinning (and make > sure they *are* spinning). The fan is spinning and the heat sink is room temp. > Be sure to take reasonable anti-static steps. Hmmm.... -- Kim Lux, Diesel Research Inc.
