On Sun, 2006-11-26 at 17:50 -0800, Andy Schlei wrote: > I am trying to install a clean version of FC6 on a PII 850 2 processor box. > > On boot from the CD, Fedora does not detect anything on the PCI bus. It > fails to find the monitor and does not find the network card, etc. > > Moving to an alternate terminal, I tried doing lspci -v and received no > output. I tried lspci -H 2 and it listed all of the PCI devices. So > somehow, this information is not making it to the kernel for use. > > I have tried every combination of PCI setup on the bios: PNP OS = Y, reset > data=yes, etc. > > It is an Tyan Tiger 133 V1.05, Award BIOS 6.00 PG, BIOS date 7/29/2000 (the > latest one available from Tyan). > > I tired booting off of the FC5 rescue disc and had the same problem. I did > not have the problem with FC4. > > Thanks in advance for the help! > Check the kernel log, does it boot with acpi? If so, try adding acpi=no to the kernel command line. (/etc/grub.conf) - Gilboa
