ok... update... there appears to be progress... i have apparently managed to get the netgear/atheros card installed in the FC4 system using madwifi. i can go to the ethernet section of the "network configuration" and i see the "atheros" information. not sure why it doesn't show up in the "wireless" section... i can setup the card with the ip address, etc.. i can ping the card... when i remove the card, the ping comes bac as network not there.. which is correct. my issue is that i can't seem to see my wireless router from the card. i've checked the wireless router and it's working with a windows pc. the router is also working from this same linux box when i use a physical wire via the eth connection... any ideas as to how i can debug/troubleshoot this issue... for testing, the router is setup to allow everything/anything to connect, so i'm not filtering or stopping anything from accessing it i'm getting a little closer!!! thanks -bruce -----Original Message----- From: fedora-list-bounces@xxxxxxxxxx [mailto:fedora-list-bounces@xxxxxxxxxx]On Behalf Of bruce Sent: Sunday, June 11, 2006 8:29 AM To: 'For users of Fedora Core releases' Cc: 'Filianx' Subject: RE: getting a wireless netgear WG511T card to work on FC hi... update... is it possible to have both line/wireless (eth0/ath0) running at the same time? could this be the cause of my problems? when i do a: ifup ath0 i get "/sbin/ifup <configuration for ath0 not found" when i do : iwconfig i get (eth0, sit0, wifi0, lo) no wireless extension, and ath0 gives me information when i do: ifconfig i get information for eth0 and lo... so i'm still lost... -bruce -----Original Message----- From: fedora-list-bounces@xxxxxxxxxx [mailto:fedora-list-bounces@xxxxxxxxxx]On Behalf Of bruce Sent: Sunday, June 11, 2006 7:12 AM To: fedora-list@xxxxxxxxxx Cc: 'Filianx' Subject: RE: getting a wireless netgear WG511T card to work on FC ok... here's the situation now... i've got a dell inspiron 8000 laptop.. (a few years old). i'm trying to get a netgear wg511t wireless card to run. i've put FC4 on the system, and did a: "yum update" to update the complete system, with all the underlying functions. i then did a: "yum install madwifi madwifi-kmdl-2111_FC4" and the system appeared to go through the motions and install the madwifi apps.. a "rpm -qa mad*" shows that i now have madwifi rpms installed on the system. i then did a "mod_probe ath_pci" finally, i went to the; "system tools->internet connection wizard->wireless connection" where i only saw the "other wireless card" i can't seem to figure out how to get the card/adapter connection to appear" any help would be greatly appreciated!!! thanks -bruce -----Original Message----- From: Axel Thimm [mailto:thimm@xxxxxxxxxxx]On Behalf Of Axel Thimm Sent: Saturday, June 10, 2006 3:47 PM To: bedouglas@xxxxxxxxxxxxx; For users of Fedora Core releases Cc: 'Filianx' Subject: Re: getting a wireless netgear WG511T card to work on FC On Sat, Jun 10, 2006 at 12:10:40PM -0700, bruce wrote: > ok... > > i've finally managed to get the system rebuilt with the FC4 apps installed. > the "uname -r" --> 2.6.11-1.1369_FC4 > > i've taken a look at the www.atrpms.com site for the madwifi rpms. in the > fc4/madwifi (madwifing) i see a number of rpms for both 1386/1686.. > > i'm not sure which ones i need for my FC version. do i need to do an update > of my FC?.. Yes, update first to the latets kernel, then point your depsolver (yum/apt/smart/...) to ATrpms (see http://atrpms.net/install.html) and simply do yum install madwifi madwifi-kmdl-`uname -r` > any thoughts/help would be greatly appreciated... > > thanks > > -bruce > > > -----Original Message----- > From: Axel Thimm [mailto:thimm@xxxxxxxxxxx]On Behalf Of Axel Thimm > Sent: Tuesday, June 06, 2006 10:26 PM > To: bedouglas@xxxxxxxxxxxxx; For users of Fedora Core releases > Cc: 'Filianx' > Subject: Re: getting a wireless netgear WG511T card to work on FC > > > On Tue, Jun 06, 2006 at 11:59:44AM -0700, bruce wrote: > > duh!!! > > > > sorry about that.. i know that there are RPMs.. I've looked at the > > atRPMs/etc.. I don't know which ones to grab!!! > > > > I also don't know that this is the end/start of the process... > > > > I was/am hoping that I can find someone who could tell me exactly which > RPMs > > to grab, as well as the process required to get everything running... > > The easiest is to let smart/yum/apt do their job with something like > > yum install madwifi madwifi-`uname -r` > > (you need to activate atrpms in your depsolver setup). > > If you need to download by hand then probably you will need (for i686, > non-smp, non-xen0): > > http://dl.atrpms.net/all/madwifi-0.9.0-23.rhfc5.at.i386.rpm > http://dl.atrpms.net/all/madwifi-kmdl-2.6.16-1.2122_FC5-0.9.0-23.rhfc5.at.i6 > 86.rpm > http://dl.atrpms.net/all/madwifi-hal-kmdl-2.6.16-1.2122_FC5-0.9.0-23.rhfc5.a > t.i686.rpm > > > It took me awhile to find a card that seems to be supported by the madwifi > > app... > > > > -bruce > > > > > > > > > > -----Original Message----- > > From: Filianx [mailto:filianx@xxxxxxxxx] > > Sent: Tuesday, June 06, 2006 11:51 AM > > To: bedouglas@xxxxxxxxxxxxx; For users of Fedora Core releases > > Subject: Re: getting a wireless netgear WG511T card to work on FC > > > > > > > > > > > > On 06/06/06, bruce <bedouglas@xxxxxxxxxxxxx> wrote: > > Hi... > > > > I have FC4 and a netgear card WG511T. Can someone walk me through > > (small/slow details) on what I need to get from madwifi... > > > > I'm assuming that it's a number of RPMs that have to be > fetched/installed.. > > But I'm not sure which ones from looking at the madwifi site. > > > > uname -a > > 2.6.11-1.1369_FC4 6 i686 i386 GNU/Linux > > > > thanks > > > > -bruce > > bedouglas@xxxxxxxxxxxxx > > > -- Axel.Thimm at ATrpms.net -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
