Neil Cherry wrote:
Mike McCarty wrote:
Has anyone considered using a cheap router as a cheap embedded
Linux machine? Or are the peripherals present just too skimpy?
You mean like a Soerkis box? Or the WRT54G (a MIPS processor, I
think). I had a working setup on a PC running at 333MHz, no hard
drive, net booted, 64M RAM (only needed 12M).
Yes, that's the idea. I was wondering about tinkering around
with a router as an embedded machine. Some years ago, I fiddled
with a couple of machines which were originally modems, with
8031 processors in them. They made fine little embedded processors.
I used the LED ports (you know, the status LEDs like "high speed",
and "DTR" and "CTS" etc.) for my output bits, and the DIP switch
configuration I took out to a panel for input bits, and of course
it had RS232 built in.
I just wonder whether a router might not be usable as a cheapo
embedded system running Linux.
Mike
--
p="p=%c%s%c;main(){printf(p,34,p,34);}";main(){printf(p,34,p,34);}
This message made from 100% recycled bits.
You have found the bank of Larn.
I can explain it for you, but I can't understand it for you.
I speak only for myself, and I am unanimous in that!
