>>>>> "Scot" == Scot L Harris <webid@xxxxxxxxxx> writes:
Scot> On Tue, 2006-03-28 at 04:04 +0100, Colin Paul Adams wrote:
>> >>>>> "Andy" == Andy Green <andy@xxxxxxxxxxx> writes:
>>
Andy> Scot L. Harris wrote:
>> >> Would also help if you posted the output of the following >>
>> commands: netstat -rn /sbin/ifconfig
>>
Andy> mii-tool eth0
>> eth0: 10 Mbit, half duplex, link ok.
>>
Scot> What type of switch do you have? Unless you have a very old
Scot> hub most newer switches are 100Mb full duplex.
I don't have a switch, and it's not 100 MB ethernet.
Anyway, I forgot to check the other end.
On the firewall machine, mii-tool eth0 gives me:
SIOCGMIIPHY on 'eth0' failed: Operation not supported
I tried reseating the card - still no joy.
So maybe that card has failed, although how it can do so I'm not sure.
--
Colin Adams
Preston Lancashire
