On Tue, 2006-03-28 at 04:04 +0100, Colin Paul Adams wrote: > >>>>> "Andy" == Andy Green <andy@xxxxxxxxxxx> writes: > > Andy> Scot L. Harris wrote: > >> Would also help if you posted the output of the following > >> commands: netstat -rn /sbin/ifconfig > > Andy> mii-tool eth0 > > eth0: 10 Mbit, half duplex, link ok. > What type of switch do you have? Unless you have a very old hub most newer switches are 100Mb full duplex. > So it looks like my network card is fine. > > Andy> might be interesting if your card works with that. Also the > Andy> output of > > Andy> route > > Looks fine - everything goes via eth0. Posting the actual output of the commands recommended would help. And read up on tcpdump or even etheral. Good tools to look at the traffic/packets on the network.
