Tim Waugh wrote:
On Fri, Feb 03, 2006 at 03:47:33PM -0600, Mike McCarty wrote:
$ cat /etc/modules.conf
# I2C module options
alias char-major-89 i2c-dev
options parport_pc io=0x378 irq=7 dma=3
When you have problems with parallel port printers, and you have
options set in /etc/modules.conf, the first thing to try is to comment
them out and see if the kernel's defaults are better than the user
options.
So comment out that options line.
I guess I didn't make myself clear. I added that line, in hopes
that it would help.
My bet is the dma=3 option is wrong for your hardware. Did you set
that up yourself?
Yes, in hopes of making things better, though they seem the same.
Thanks!
I'll try removing just the dma.
Mike
--
p="p=%c%s%c;main(){printf(p,34,p,34);}";main(){printf(p,34,p,34);}
This message made from 100% recycled bits.
You have found the bank of Larn.
I can explain it for you, but I can't understand it for you.
I speak only for myself, and I am unanimous in that!
