david walcroft wrote:
david walcroft wrote:
Ok, I'll set up with MODEL=genericups, but I'm not sure what USB uses
for connections <socket> <port> and how to determine the same for a
config file.
Thanks for all you help Markku. david
For what it's worth this is at restart in s-c-services:
ups failed. The error was: Stopping UPS monitor: [FAILED]
Stopping upsd: [FAILED]
Shutting down genericups: [FAILED]
Starting genericups: Network UPS Tools - Generic UPS driver 1.30 (2.0.2)
[FAILED]
Starting upsd: Network UPS Tools upsd 2.0.2
[FAILED]
Starting UPS monitor (master): [ OK ]
david
Further activity,this as far as I have ventured and now I really don't
understand what is going on:
ups failed. The error was: Stopping UPS monitor: [FAILED]
Stopping upsd: [FAILED]
Shutting down genericups: [FAILED]
Starting genericups: Network UPS Tools - Generic UPS driver 1.30 (2.0.2)
[FAILED]
Starting upsd: Network UPS Tools upsd 2.0.2
[FAILED]
Starting UPS monitor (master): Network UPS Tools upsmon 2.0.1
Fatal error: insufficient power configured!
Sum of power values........: 0
Minimum value (MINSUPPLIES): 1
Edit your upsmon.conf and change the values.
[FAILED]
With (MINSUPLLIES): 1, upsmon.conf states
<powervalue> is an integer - the number of power supplies that this UPS
# feeds on this system. Most computers only have one power supply, so this
# is normally set to 1. You need a pretty big or special box to have any
# other value here.
#
# You can also set this to 0 for a system that doesn't supply any power,
# but you still want to monitor. Use this when you want to hear about
# changes for a given UPS without shutting down when it goes critical,
# unless <powervalue> is 0.
#
# <username> and <password> must match an entry in that system's
# upsd.users. If your username is "monmaster" and your password is
# "blah", the upsd.users would look like this:
#
# [monmaster]
# password = blah
# allowfrom = (whatever applies to this host)
# upsmon master (or slave)
#
# "master" means this system will shutdown last, allowing the slaves
# time to shutdown first.
#
# "slave" means this system shuts down immediately when power goes critical.
#
# Examples:
#
# MONITOR myups@bigserver 1 monmaster blah master
# MONITOR su700@xxxxxxxxxxxxxxxxxx 1 upsmon secretpass slave
MONITOR "genericups usptype=7"@reddwarf 0 david 4skin46 master
If I can state "0" why do I get an error.
Thanks david
