david walcroft kirjoitti viestissään (lähetysaika sunnuntai, 25. syyskuuta 2005 00:37): > # If the UPS is locally attached set it to "yes" > SERVER=yes > # Model of the UPS (filename to call for it, without path) > # Example - one of > # apcsmart - APC SMartUPS and similar > # fentonups - Fenton UPS > # optiups > # bestups > # genericups > # ups-trust425+625 > # upsdrvctl > # You MUST change this, or set SERVER to "no" > # To support multiple drivers, set MODEL=upsdrvctl > MODEL=Powermate-3105 The "MODEL" parameter does _not_ mean the actual model of your ups, you must set it to the nut driver used for your UPS (or "upsdrvctl"). > # UPS device - needed if UPS is locally attached > DEVICE=/dev/ttyS0 Wasn't your UPS connected through USB, not the serial port? -- Markku Kolkka markku.kolkka@xxxxxx
