Matthew Saltzman wrote:
On Sat, 24 Sep 2005, david walcroft wrote:
Matthew Saltzman wrote:
On Sat, 24 Sep 2005, david walcroft wrote:
Hi,
I'm trying to set up my ups [Powermate 3105] so far :
1/ It's recognised as 'Vendor=0592 Prodid=0002'
2/ Kernel message : 'reddwarf kernel: usb 2-1: new low speed USB
device using uhci_hcd and address 2'
I installed 'CheckUPS' from Powermate.com.au
Read posts at marc.theaimsgroup, didn't appear to help (serial
connections as against usb)
Have problems in understanding which port or pipe to use.
similar problem in uderstanding how you start it running and the
config files for me are murder to work through.
I realy need someone to help me install/run Nut/CheckUPS
Thanks david
ALthough there's no documentation refrerring to it, you need to
configure nut in FC using /etc/sysconfig/ups. Things that you can
set there need to be set there. Other things are configured using
the files in /etc/ups.
Also, there's a bug against the kernel (can't get to Bugzilla to
check the number just now due to flakey net connection) regarding the
hidups driver and unhandled interrupts that may cause you problems
(unless it's fixed in the latest updates-testing kernel).
Matthew,
Progress so far,read Bugzilla Bug 164051 and 160700 Very helpful
upgraded to nut 2.0.2.1 and able start nut with the result :
[david@reddwarf ~]$ sudo service ups restart
Stopping UPS monitor: [FAILED]
Stopping upsd: [FAILED]
Shutting down Powermate-3105: [FAILED]
Starting Powermate-3105: /etc/init.d/functions: line 148:
/sbin/Powermate-3105: No such file or directory
[FAILED]
Starting upsd: Network UPS Tools upsd 2.0.2
Can't chdir to /var/run/nut: No such file or directory
[FAILED]
Starting UPS monitor (master): Network UPS Tools upsmon 2.0.1
UPS: genericups@reddwarf (master) (power value 1)
Using power down flag file /etc/killpower
[ OK ]
But not able to tell if nut is doing anything.
What's in /etc/sysconfig/ups?
Information requested in the attachment.
david
# If the UPS is locally attached set it to "yes"
SERVER=yes
# Model of the UPS (filename to call for it, without path)
# Example - one of
# apcsmart - APC SMartUPS and similar
# fentonups - Fenton UPS
# optiups
# bestups
# genericups
# ups-trust425+625
# upsdrvctl
# You MUST change this, or set SERVER to "no"
# To support multiple drivers, set MODEL=upsdrvctl
MODEL=Powermate-3105
# UPS device - needed if UPS is locally attached
DEVICE=/dev/ttyS0
# Any options to pass to $MODEL
# ex. for my TrippLite UPS, use
# OPTIONS="-t 5"
OPTIONS=
# Any options to pass to upsd
UPSD_OPTIONS=
#
# [End]
