On Fri, 2005-08-26 at 16:47 -0600, Philip Prindeville wrote: > Craig White wrote: > > >On Fri, 2005-08-26 at 12:19 -0600, Philip Prindeville wrote: > > > > > >>I'm getting the message "No driver found" during an attempted > >>install of FC3.i386 on an AMD NX1500S DB (mini-ITX) mainboard. > >>It uses the SiS5513 chipset (962/963) south and northbridge chipsets. > >> > >>The problem is, I can't tell which device it's missing the driver for. > >> > >>Sure would help if it gave a slot number, or PCI ID, device category > >>(video, disk controller, etc). > >> > >>Any ideas? > >> > >> > >---- > >try switching to virtual console 4 and see what the print is on screen.. > > > ><Alt><Control><F4) > > > >Craig > > > > > > > > Well, vty3 tells me that "54 keymaps are available" and vty4 gives me > the probing/autoconfiguration information for eth0... > > Otherwise, nothing looks suspicious other than the fact that it fails to > find a floppy controller (I tried to boot with "nousb nofloppy" because > it hangs at "running /sbin/loader" if I don't give the "nousb" argument... > no idea why)... ---- try some of the boot options listed in item 6 of fedorafaq (for FC-3) http://www.fedorafaq.org/fc3/ Q: I have strange installation problems. A: If your installation doesn't work, or you have problems during or after installation, first read the README <http://download.fedora.redhat.com/pub/fedora/linux/core/3/i386/os/README-en.html> and the Release Notes. <http://download.fedora.redhat.com/pub/fedora/linux/core/3/i386/os/RELEASE-NOTES-en.html> If the README and Release Notes don't have a solution for your problem, try booting the installer with one of the following commands: linux ide=nodma linux acpi=off linux i8042.nomux linux acpi=off apm=off The "i8042.nomux" is especially helpful if you have keyboard or mouse problems. If any of those commands fixes your problem, please file a bug in Red Hat's Bugzilla. (Thanks to Alan Cox for all this information.) Craig