Chris Kirk wrote:
I did what you said and now when I turn on the PC it says
GRUB Loading stage2...
I ran the cmd
install (hd0,0)/grub/stage1 (hd0) (hd0,0)/grub/stage2 p (hd0,0)/grub/grub.conf
I then checked the grub.conf file to make sure it is all correct, and
then rebooted and it still hangs on the GRUB Loading stage2...
Any ideas?
I believe I came across a problem similar to yours a while back. It was
a problem with SuSE - it refused to boot from the HDD but booted fine
with the Boot CD. Eventually, it turned out that the boot partition was
not marked as active. So you might want to look into that. Try (as root)
#fdisk -l
and see if the Boot column has a '*' for /dev/hda1. If not, you can run
#fdisk /dev/hda
and then type 'a' at the fdisk prompt to toggle the bootable flag. Once
done, you need to save the changes to the partition table and exit. Type
'm' at the fdisk prompt for help.
HTH
-M
-Chris
