Eric Tanguy wrote:
Le dimanche 03 juillet 2005 à 23:15 +0200, Eric Tanguy a écrit :
I try to use spca5xx driver for my usb creative NX webcam. All seems
fine except that the system hangs at boot up if the webcam is plugged
in. When the system hangs if i unplugged the webcam the system continue
the boot process. Someone has an idea to solve this problem ?
Thanks
No one use this very usefull driver ?
--
Eric Tanguy | Nantes, France
<eric.tanguy@xxxxxxxxxxxxxx>
Key : A4B8368F | Key Server : subkeys.pgp.net
Fedora Core release 4 (Stentz) sur athlon kernel 2.6.12-1.1390_FC4
Yes, I use the spca5xx driver module. I've used it for my Ezonics
EZ-306 USB webcam with FC2 and now with FC4. I'm currently running the
stock 2.6.12-1.1390_FC4 i686 kernel on a Gigabyte GA-7VT600-L
motherboard with an AMD XP 2600+ processor using the spca5xx-20050601
loadable module driver. It works fine with GnomeMeeting and does not
cause any boot problems with the webcam plugged in at boot time. I
assume you have done a fresh rebuild and reinstall of the spca5xx
module? Tony Nelson's suggestion to check your boot dmesg log file to
see when the spca5xx module is loaded is a good idea. The spca5xx
module is the last module loaded on my system. Make sure it is loading
after your USB drivers.
---
Rod
