Alexander Apprich wrote:
Mark,
Mark Sargent wrote:
Alexander Apprich wrote:
Mark Sargent wrote:
Paul Howarth wrote:
Mark Sargent wrote:
Edwin Dicker wrote:
[snip]
Hi All,
hmmm, not outa the woods yet. Still getting the undefined error.
Switch#copy run tftp
Source filename [running-config]? running-config
Destination IP address or hostname []? 192.168.168.12
Destination filename [running-config]? /tftpboot/running-config
Building configuration...
.....
%Error opening tftp://192.168.168.12//tftpboot/running-config (Undefined error)
Ok, lets run through my set up, again,
dir permissions for tftpboot,
[root@localhost tftpboot]# ls -alh total 8.0K drwxr-xr-x 2 root root 4.0K Mar 24 14:10 . drwxrwxrwx 24 nobody nobody 4.0K Mar 24 12:55 ..
above tftpboot is owned by nobody:nobody as per this site,
http://www.linux.com/howtos/Clone-HOWTO/setting-up.shtml is it right..? as wello as it's suggestions below for xinetd.d/tftp
xinetd.d/tftp settings
[root@localhost tftpboot]# cat /etc/xinetd.d/tftp
# default: off
# description: The tftp server serves files using the trivial file transfer # protocol. The tftp protocol is often used to boot diskless # workstations, download configuration files to network-aware printers, # and to start the installation process for some operating systems.
service tftp
{
socket_type = dgram
protocol = udp
wait = yes
user = root
server = /usr/sbin/in.tftpd
server_args = -c -s /tftpboot
disable = no
per_source = 11
cps = 100 2
flags = IPv4
}
Correct..?
This site below is a little different,
http://www.linuxhomenetworking.com/linux-hn/xinetd.htm
as it suggests creating the destination file prior to the transfer. Ok, some questions, do I create the dest filename b4hand, and if so, what ownership/permissions is required for it.? I'm lost. Anyone..? Cheers.
Mark Sargent.
My directory permissions
root@elmstreet / # ll -d /var/tftpboot/ drwxrwxrwx 3 root root 4096 Mar 24 07:17 /var/tftpboot//
[root@localhost tftpboot]# ll -d /tftpboot/ drwxrwxrwx 2 root root 4096 Mar 24 14:10 /tftpboot/
[root@localhost ~]# cat /etc/xinetd.d/tftp
Here's my /etc/xinetd.d/tftp
root@elmstreet / # cat /etc/xinetd.d/tftp service tftp { socket_type = dgram protocol = udp wait = yes user = root server = /usr/sbin/in.tftpd server_args = -c -s /var/tftpboot disable = no per_source = 11 cps = 100 2 flags = IPv4 }
# default: off
# description: The tftp server serves files using the trivial file transfer # protocol. The tftp protocol is often used to boot diskless # workstations, download configuration files to network-aware printers, # and to start the installation process for some operating systems.
service tftp
{
socket_type = dgram
protocol = udp
wait = yes
user = root
server = /usr/sbin/in.tftpd
server_args = -c -s /tftpboot
disable = no
per_source = 11
cps = 100 2
flags = IPv4
}
Make sure no tftpd process is running... (kill it if u find 1)
root@elmstreet / # ps auxwww | grep ftp
nobody 4706 0.0 0.0 5004 572 ? Ss Mar07 0:01 proftpd: (accepting connections)
root 525 0.0 0.0 3928 556 pts/1 R+ 07:17 0:00 grep ftp
[root@localhost tftpboot]# ps auxwww | grep ftp root 6314 0.0 0.2 4276 680 pts/1 R+ 17:15 0:00 grep ftp
[root@localhost tftpboot]# service xinetd restart
Restart xinetd
root@elmstreet / # service xinetd restart Stopping xinetd: [ OK ] Starting xinetd: [ OK ]
Stopping xinetd: [ OK ]
Starting xinetd:
Here I copy the startup-config from a cisco 3660 router
gw-lan-1#copy startup-config tftp://10.0.0.129/startup Address or name of remote host [10.0.0.129]? Destination filename [startup]? !!!!!!!!!!!! 53297 bytes copied in 0.208 secs (256236 bytes/sec)
Switch>en Switch#copy run tftp://192.168.168.12/running-config Source filename [running-config]? Destination IP address or hostname [192.168.168.12]? Destination filename [running-config]? Building configuration... ..... %Error opening tftp://192.168.168.12/running-config (Undefined error)
And here we go...
Unfortunately, I ain't goin' nowhere.
root@elmstreet / # ll /var/tftpboot/startup -rw-rw-rw- 1 nobody nobody 53297 Mar 24 07:17 /var/tftpboot/startup
Alex
I'm at a loss with this. Driving me nutz. Cheers.
Hmmm, can you ping 192.168.168.12 from the switch? gw-lan-1#ping 10.0.0.129
Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.0.0.129, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/4 ms
Mark Sargent.
Alex
Hi All,
yes, Alex, it's pingable from the switch,
Switch>ping 192.168.168.12
Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 192.168.168.12, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/202/1006 ms Cheers.
Mark Sargent.
