Paul Howarth wrote: [stuff deleted] >> >> [shelagh@pandorasbox shelagh]$ netstat -rn >> Kernel IP routing table >> Destination Gateway Genmask Flags MSS Window irtt >> Iface >> 220.244.163.3 0.0.0.0 255.255.255.255 UH 0 0 0 >> ppp0 >> 192.168.32.0 192.168.32.3 255.255.255.0 UG 0 0 0 >> eth0 >> 192.168.32.0 0.0.0.0 255.255.255.0 U 0 0 0 >> eth0 >> 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 >> eth0 >> 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 >> lo >> 0.0.0.0 220.244.163.3 0.0.0.0 UG 0 0 0 >> ppp0 >> [stuff deleted] > > This all looks fine. You still didn't say which routes you wanted to add > or delete. You can stop the zeroconf route appearing appearing by > putting "NOZEROCONF=yes" in /etc/sysconfig/network; next time your > machine reboots, it'll be gone. > > Paul. OK. I just wanted to add the 127.0.0.1 address as it said was a proper setup in NAG. I saw the 127.0.0.0 address and thought maybe that I'd setup an incorrect parameter at some earlier stage which worked but not optimally. Do all the gateway settings seem OK? Mine is the machine with the 192.168.32.3 IP. My 2 sons machines are -.1 & -.2. Is this a bad idea? Everything I've read suggests that I probably should be -.1 and they on larger numbers. PS what's a zeroconf route. (exposing the depths of my ignorance here!) Shelagh
