in Druid:
new>hdb1 only>software RAID>fill to 102mb>primary partition checked new>hdb2 only>software RAID>fill to 114369
new>hdb3 only>swap>fill to 512 new>hdc1 only>software RAID>fill to 102mb>primary partition checked new>hdc2 only>software RAID>fill to 114369 new>hdc3 only>swap>fill to 512
RAID>create device md(0) mountpoint = /boot >hdb1,hdc1 checked RAID>create device md(1) mountpoint = / > hdb2, hdc2 checked
That looks proper.
that's bout it...chose next and we on the way...starts installing and whammo...no disk space grrrrrrrrrrr ...system will reboot...just hit ok
I don't think that is a RAID related problem.
http://www.fedorafaq.org/fc1/#IntelD845
I would try to process installation with "linux ide=nodma" booting. Or see the other hints regarding the different hardward.
ok I did "linux ide=nodma" ....it looks like that was the problem!
but now that opens up another can of worms. so now, yes, I am sure that
the problem was/is in the hardware and not w/my raid configuration.
during this install(which is still going on) this system has lost at
least 90% of it's speed! Considering that w/out dma, everything has to
come and go thru the processor really dragging the system down...then
also the type of operation we are asking the system to do; write to 2
hard drives instead of 1, puts more stress on the processor. It just
doesn't seem to be the route to go.
I am going to let it finish installing....2 1/2 more hrs...let it boot up and I am really considering swapping the motherboard out w/a spare slot A I have here and try installing normally.
At least we did narrow down the problem thx to Alexander's suggestion
john rose
You might try to remove the ide=nodma from the grub.conf file to see if the system works with dma. I believe that the option is inserted in the grub.conf file if you use the paranmeter during installation.
Jim
