On Sat, 8 Jan 2005, Bill Moss wrote: > The first time I experimented with cups, I found that it was scanning > and finding bogus printers. The scanning was just screwing things up and > causing K Print Manager to hang. All I wanted to do was configure > gutenberg, ramunujan, and guthrie. I found that if I set I assume this was meant for me rather than the list. Bill and I are both at Clemson, and gutenberg, guthrie, and ramanujan are IP names of HP network printers in our department. > > Browsing Off > > in cupsd.conf > > the problem went away. The default is On. I *think* we are talking about print servers or locally attached printers. Browsed printers don't seem to end up in /etc/cups/cupsd.conf. There are loads of garbage printers (presumably badly configured printers attached to student, faculty, staff, or office machines) that show up on our network when browsing is on. The HP network printers accept IPP but don't broadcast, so I have them configured by hand as CUPS printers. They are also accessible through JetDirect or a Solaris LPD server. I could get away without browsing at work. At home, my print server does broadcast, so I do use browsing. (I could do it without broadcasting, but it works so nicely with it, mostly.) But my USB printer shows up twice in cupsd.conf on my server, once as CUPS detects it and once as the USB subsystem detects it. Those lines appear below a line that says # Lines below are automatically generated - DO NOT EDIT > > Matthew Saltzman wrote: > > >On Fri, 7 Jan 2005, Aleksandar Milivojevic wrote: > > > > > > > >>Tim Waugh wrote: > >> > >> > >>>On Thu, Jan 06, 2005 at 11:09:41PM -0600, Andrew Robinson wrote: > >>> > >>> > >>> > >>> > >>>>My cupsd.conf file keeps changing, adding printers I had deleted and > >>>>removing access to networks other than 127.0.0.0. I'll edit the file and > >>>>restore it to the state I want it. But after the next reboot or > >>>>seemingly after a few days, the file has changed again. What is changing > >>>>cupsd.conf? What file or files controls what gets put in cupsd.conf? > >>>> > >>>> > >>>Remove system-config-printer if you need to hand-edit CUPS files. > >>> > >>> > >>In addition to getting rid of system-config-printer. Updating cups > >>package will sometimes overwrite your existing cupsd.conf (old copy > >>saved to cupsd.conf.rpmsave). Do you have yum enabled to automatically > >>download and install updates (what is the output of "chkconfig --list yum")? > >> > >> > > > >If there are USB printers involved, there is apparently a bug where the > >USB subsystem creates duplicates of printers created with other tools. > >It's in Bugzilla somewhere, probably under CUPS. > > > > > > > > -- Matthew Saltzman Clemson University Math Sciences mjs AT clemson DOT edu http://www.math.clemson.edu/~mjs
