Dear Reader, I have a problem setting up a Tyan Thunder K7X Pro with a Matrox G550 videocard with Xorg-X11 as part of Fedora Core 3 (screen is a 19" Iilyama Pro 452). It used to be a nobrainer and looked very handsome right upto and including Fedora Core 1 with XFree86. Problem is that the system hangs after either probing the "Xorg -configure" resulted /root/xorg.conf.new or after "system-config-display". Finally displayed message is this : "Trying with Matrox G550-card" or words to that effect. After this it blanks out forcing a reboot as a result. When switching the driver in the Device-section of /etc/X11/xorg.conf from "mga" to "vesa" it works but it looks rather lousy when compared with what it used to look like under XFree86. Strange thing is that a nearly identical Tyan Thunder K7 Pro with a Matrox G450 works like it supposed to with FC3/Xorg. I have installed the latest driver supplied by Matrox (october 2004 : found in mgadriver-4.0.tar.gz) and also FC3/Xorg is complete and up to date. Flagging off the "dri" option does not make any difference. Any experiences with Matrox ? Any suggestions ? Regards John Pover Why a Matrox G550 in such a system ? Well, that is another story : those of you who have ever tried to marry a ATI All in Wonder 9800 with a Tyan mobo probably have the same high bloodpressure as I have. Disclaimer ************************************************************************ Aan dit bericht kunnen geen rechten worden ontleend. Dit bericht is uitsluitend bestemd voor de geadresseerde. Als u dit bericht per abuis hebt ontvangen, wordt u verzocht het te vernietigen en de afzender te informeren. Wij adviseren u om bij twijfel over de juistheid of de volledigheid van de mail contact met afzender op te nemen. This message shall not constitute any rights or obligations. This message is intended solely for the addressee. If you have received this message in error, please delete it and notify the sender immediately. When in doubt whether this message is correct or complete, please contact the sender. ************************************************************************
