On Fri, 2004-10-08 at 06:06, Filippos Klironomos wrote:
> >
> > scsibus0:
> > 0,0,0 0) 'Generic ' 'STORAGE DEVICE ' '1.00' Removable Disk
> >
>
> I am not sure if I like this! What is your CD drive name? It should
> be showing here. I think your CD drive is not recognized properly. Can
> you please post the exact error message you get from the bootup
> prosess? Do a:
>
> grep -i -C5 'hdc' /var/log/dmseg
>
> and then post the results. Also look at
>
> cat /proc/ide/hdc/
>
> for media info. I think you problem is here.
I have a AOpen drive.
grep -i -C5 'hdc' /var/log/dmesg
NFORCE2: IDE controller at PCI slot 0000:00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST340810A, ATA DISK drive
hdb: WDC WD600BB-32CCB0, ATA DISK drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: AOPEN CD-RW CRW5232 1.03 20031013, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63,
UDMA(33)
hda: hda1 hda2 hda3
hdb: max request size: 128KiB
hdb: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=65535/16/63,
UDMA(33)
hdb: hdb1
hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
--
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
EXT3 FS on hda2, internal journal
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@xxxxxxxxxxxxxx
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x50
end_request: I/O error, dev hdc, sector 0
Adding 2047744k swap on /dev/hda3. Priority:-1 extents:1
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
udf: registering filesystem
cdrom: hdc: mrw address space DMA selected
cdrom: hdc: mrw address space DMA selected
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
cd /proc/ide/hdc
cat driver
ide-cdrom version 4.61
cat capacity
4
cat media
cdrom
cat model
AOPEN CD-RW CRW5232 1.03 20031013
cat settings
name value min max
mode
---- ----- --- ---
----
current_speed 66 0 70
rw
dsc_overlap 0 0 1
rw
ide-scsi 0 0 1
rw
init_speed 12 0 70
rw
io_32bit 1 0 3
rw
keepsettings 0 0 1
rw
nice1 1 0 1
rw
number 2 0 3
rw
pio_mode write-only 0 255
w
unmaskirq 1 0 1
rw
using_dma 1 0 1
rw
Here it does show it as an AOpen drive and not just generic.
Thanks again
