On Fri, 2004-08-27 at 09:35, Thinker wrote: > On Aug 26, 2004, at 5:32 PM, Thinker wrote: > > > I have just completed the ftp install for FC2 on my Gateway Profile 3. > > For anyone unfamiliar with this model, take a look at > > http://products.gateway.com/products/GConfig/prodDetails.asp? > > system_id=prf5m1&seg=sb > > > > Anyway, these machines have PCMCIA slots like laptops and I have a > > 3Com Wireless card (3CRPAG175) that worked flawlessly when this > > machine had Windows XP home on it. How do I configure the card, the > > networking and wifi on it. > > > > Thanks in advance > > > > .:Thinker > > > > Sorry for replying to my own post, but I still have not found a > solution to this. The Card is not even blinking so I don't think the > PCMCIA slot is activated. How can I check, and where do I configure my > SSID and Encryption for the network. > > Thanks, > > .:Thinker Linux support for wireless cards IMHO is pretty poor. You will need to determine the chip set used in your wireless card (prism, broadcom, etc.) Then search out either a driver project that supports that chip set such as prism54 which works on the D-link DWL-G650 I have or you may have to use ndiswrappers which uses the windows driver supplied with the card. When you search out what chip set you have on your card make sure you check the version of the card you have. Many vendors have the same model number on a variety of cards which have different chip sets, linksys I know has done this as well as some others. Once you get the basic driver issue figured out you should be able to set the SSID and wep information in the Network Configuration GUI. You can also edit the scripts directly if needed. -- Scot L. Harris webid@xxxxxxxxxx The graveyards are full of indispensable men. -- Charles de Gaulle
