On Tue, 2004-04-27 at 09:38, jludwig wrote: > On Tue, 2004-04-27 at 09:20, Gary Stainburn wrote: > > Hi folks. > > > > I've got an Advent 5372 laptop with what MS Windows detects as a 'SIS 900 PCI > > Fast Ethernet Adapter'. > > > > When I had RH7.3 on the NIC was detected straight out of the box and worked > > fine. When I replaced this wic FC1 everything looked fine, with it finding > > the card okay and allowing me to configure it. > > > > However, there's absolutely no traffic happening with the card (booting to > > windows proves the card, cable etc work). > > > > my /etc/modules.conf has the line > > > > alias eth0 sis900 > > > > and lsmod includes sis900, sis and sisfb > > > > Any suggestions on how to fix it? > > -- > > Gary Stainburn > > > > This email does not contain private or confidential material as it > > may be snooped on by interested government parties for unknown > > and undisclosed purposes - Regulation of Investigatory Powers Act, 2000 > What does route -n and ifconfig indicate? Can the card ping itself. I > have the same adapter in my firewall/gateway as eth0 (Ext IF) running > FC1. It upgraded without any issues from RH9.0. > -- > jludwig <wralphie@xxxxxxxxxxx> Let me add my FW/GW is a desktop system.-- jludwig <wralphie@xxxxxxxxxxx>
