On Tue, 2004-04-27 at 09:20, Gary Stainburn wrote: > Hi folks. > > I've got an Advent 5372 laptop with what MS Windows detects as a 'SIS 900 PCI > Fast Ethernet Adapter'. > > When I had RH7.3 on the NIC was detected straight out of the box and worked > fine. When I replaced this wic FC1 everything looked fine, with it finding > the card okay and allowing me to configure it. > > However, there's absolutely no traffic happening with the card (booting to > windows proves the card, cable etc work). > > my /etc/modules.conf has the line > > alias eth0 sis900 > > and lsmod includes sis900, sis and sisfb > > Any suggestions on how to fix it? > -- > Gary Stainburn > > This email does not contain private or confidential material as it > may be snooped on by interested government parties for unknown > and undisclosed purposes - Regulation of Investigatory Powers Act, 2000 What does route -n and ifconfig indicate? Can the card ping itself. I have the same adapter in my firewall/gateway as eth0 (Ext IF) running FC1. It upgraded without any issues from RH9.0. -- jludwig <wralphie@xxxxxxxxxxx>
