Re: Ethernet

[bulent <bacikgoz@xxxxxxxxxx>]

Jeff Vian wrote:

> So your problem is ???????
>
> bulent wrote:
>
> > Eric Diamond wrote:
> >
> > > Wednesday, April 07, 2004 3:57 AM Bülent Açy'kgöz
> > > wrote:
> > >  
> > >
> > > > Alexander Dalloz wrote:
> > > >
> > > >  
> > > >
> > > > > >       Link detected: no
> > > > > >       
> > > > >
> > > > >
> > > > >                            ^^^^^
> > > > > You see that? You have no link, thus you can not
> > > > >     
> > > successfully change 
> > >
> > > > > anything.
> > > > >
> > > > > ...snip...
> > > > >
> > > > > Still no link! Check your cables. Check the other
> > > > >     
> > > side of the cable, 
> > >
> > > > > check the plug in the switch/hub/router or where it
> > > > >     
> > > is.
> > >  
> > >
> > > > No I have link , Because I am downloading eveything
> > > >   
> > >
> > >
> > > also 
> > >
> > > > working samba and others.
> > > > Do you have any suggesstion?
> > > >
> > > >   
> > >
> > >
> > >
> > > Bülent,
> > >
> > > Could you please post your 'ifconfig -a' output?
> > >
> > > Eric Diamond
> > > eDiamond Networking & Security
> > > 303-246-9555
> > > eric@xxxxxxxxxxxx
> > >
> > >
> > >
> > >  
> > Hello, ifconfig output like this;
> >
> > [root@sbe-60 root]# ifconfig -a
> > eth0      Link encap:Ethernet  HWaddr 00:02:44:66:D3:32
> >          inet addr:144.122.85.60  Bcast:144.122.85.255  
> > Mask:255.255.255.0
> >          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
> >          RX packets:301403 errors:0 dropped:0 overruns:0 frame:0
> >          TX packets:115798 errors:14 dropped:0 overruns:0 carrier:0
> >          collisions:0 txqueuelen:1000
> >          RX bytes:51269291 (48.8 Mb)  TX bytes:119416712 (113.8 Mb)
> >          Interrupt:11 Base address:0xec00
> >
> > lo        Link encap:Local Loopback
> >          inet addr:127.0.0.1  Mask:255.0.0.0
> >          UP LOOPBACK RUNNING  MTU:16436  Metric:1
> >          RX packets:54794 errors:0 dropped:0 overruns:0 frame:0
> >          TX packets:54794 errors:0 dropped:0 overruns:0 carrier:0
> >          collisions:0 txqueuelen:0
> >          RX bytes:101928795 (97.2 Mb)  TX bytes:101928795 (97.2 Mb)
> >
> > also,
> > root@sbe-60 root]# mii-tool eth0
> > eth0: 10 Mbit, half duplex, no link
> > [root@sbe-60 root]# ping 144.122.199.20
> > PING 144.122.199.20 (144.122.199.20) 56(84) bytes of data.
> > 64 bytes from 144.122.199.20: icmp_seq=0 ttl=63 time=1.69 ms
> > 64 bytes from 144.122.199.20: icmp_seq=1 ttl=63 time=1.39 ms
> > 64 bytes from 144.122.199.20: icmp_seq=2 ttl=63 time=1.45 ms
> > 64 bytes from 144.122.199.20: icmp_seq=3 ttl=63 time=1.27 ms
> > 64 bytes from 144.122.199.20: icmp_seq=4 ttl=63 time=1.56 ms
> > 64 bytes from 144.122.199.20: icmp_seq=5 ttl=63 time=1.50 ms
> > 64 bytes from 144.122.199.20: icmp_seq=6 ttl=63 time=1.58 ms
> >
> >
> > Thank you...
My porblem like this;

root@sbe-60 root]# mii-tool eth0
eth0: 10 Mbit, half duplex, no link

as you see, there is "no link" warning , what does  it mean?
and I didn't change 10Mbit to 100Mbit with mii-tool.
Do you have any suggestion?

--
Bülent Açikgöz
DBA & Sytem Administrator

Mobile: +90 532 5639505
Work  : +90 312 2103810
Adress: ODTU MM Binasi 3.Kat No:320 
Balgat/ANKARA/TURKIYE

There is no crueler tyranny than that which is perpetrated under the shield of law and in the name of justice.