i'm still wrestling with trying to get my inspiron 8100 running FC1 to recognize a new PCMCIA net card i just got. the card is an etherfast 10/100 cardbus pc card (PCMPC200), which i'm sure i verified is supported. from a HW list i saw, the module for this card is supposed to be tulip_cb.o. while there is no such module under the current kernel, someone else pointed out the existence of xircom_tulip_cb.o (despite the fact that it's not a xircom, perhaps it will still work). when i plug the card in, i get "pcnet_cs device eth0 does not seem to be present, delaying initialization." i've checked that "cardctl ident" sees the card fine, with manfid: 0x13d1, 0xab02 until now, i've used an older linksys ethercard that just worked out of the box, so i've been lucky and never had to mess with pcmcia configuration (translation: i've been blissfully ignorant of what i might eventually might have to do). is anyone else using this card? care to share the recipe? rday
