Jeff Garzik wrote:
> Robert Hancock wrote:
> >Yes, the fact that it's going into simplex mode is the problem, it
> >wasn't in simplex to start with. It looks like pata_amd does an
> >ata_pci_clear_simplex only for certain chip models, maybe this model
> >needs it as well?
>
> Deleting the ata_pci_clear_simplex() call, then adding
> ATA_FLAG_IGN_SIMPLEX to the ata_port_info info[] array, is also worth
> trying.
I tried the latter option and it works fine.
I didn't delete the ata_pci_clear_simplex call, since it is not
called for this model.
BTW, this the nVidia MCP55 IDE controller:
00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1)
00:04.0 0101: 10de:036e (rev a1)
Index: linux-2.6.20/drivers/ata/pata_amd.c
===================================================================
--- linux-2.6.20.orig/drivers/ata/pata_amd.c 2007-02-17 10:27:59.000000000 +0100
+++ linux-2.6.20/drivers/ata/pata_amd.c 2007-02-17 10:28:14.000000000 +0100
@@ -611,7 +611,7 @@
},
{ /* 8: Nvidia Nforce2 and later */
.sht = &amd_sht,
- .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_IGN_SIMPLEX,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.udma_mask = 0x7f, /* UDMA 133, no swdma */
[ 1087.954496] ata5.00: disabled
[ 1087.954500] ata5.01: disabled
[ 1087.958725] Trying to free nonexistent resource <00000000000001f0-00000000000001f7>
[ 1087.958730] Trying to free nonexistent resource <0000000000000170-0000000000000177>
[ 1089.559228] pata_amd 0000:00:04.0: version 0.2.7
[ 1089.559240] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 1089.560866] ata7: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000 irq 14
[ 1089.561118] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xF008 irq 15
[ 1089.561133] scsi8 : pata_amd
[ 1089.717718] ata7.00: ATAPI, max UDMA/33
[ 1089.797629] ata7.01: ATAPI, max UDMA/66
[ 1089.877519] ata7.00: configured for UDMA/33
[ 1089.957429] ata7.01: configured for UDMA/33
[ 1089.957948] scsi9 : pata_amd
[ 1089.957996] ata8: port disabled. ignoring.
[ 1089.957998] ata8: reset failed, giving up
[ 1089.960193] scsi 8:0:0:0: CD-ROM _NEC DVD_RW ND-3500AG 2.1A PQ: 0 ANSI: 5
[ 1089.962400] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 1089.962442] sr 8:0:0:0: Attached scsi CD-ROM sr0
[ 1089.962474] sr 8:0:0:0: Attached scsi generic sg1 type 5
[ 1089.963938] scsi 8:0:1:0: CD-ROM PIONEER DVD-ROM DVD-106 1.22 PQ: 0 ANSI: 5
[ 1089.966730] sr1: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
[ 1089.966769] sr 8:0:1:0: Attached scsi CD-ROM sr1
[ 1089.966802] sr 8:0:1:0: Attached scsi generic sg2 type 5
[ 1096.079852] Stopping tasks ... done.
[ 1096.126558] Shrinking memory... -\|/-done (51275 pages freed)
[ 1097.076333] Freed 205100 kbytes in 1.63 seconds (125.82 MB/s)
[ 1097.076336] Suspending console(s)
[ 1097.080211] ACPI: PCI interrupt for device 0000:01:08.0 disabled
[ 1097.092133] ata8: port disabled. ignoring.
[ 1097.092135] ata8: reset failed, giving up
[ 1097.092153] ACPI: PCI interrupt for device 0000:00:02.1 disabled
[ 1097.098774] ACPI: PCI interrupt for device 0000:00:02.0 disabled
[ 1097.105558] Extended CMOS year: 20
[ 1097.105562] swsusp: critical section:
[ 1097.119909] swsusp: Need to copy 120019 pages
[ 46.569060] Extended CMOS year: 20
[ 46.586207] ACPI: Unable to turn cooling device [ffff81003fe90890] 'on'
[ 46.599040] PCI: Enabling device 0000:00:02.0 (0000 -> 0002)
[ 46.599044] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 22
[ 46.599050] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 46.599055] PM: Writing back config space on device 0000:00:02.0 at offset f (was 1030100, writing 103010a)
[ 46.599062] PM: Writing back config space on device 0000:00:02.0 at offset 4 (was 0, writing fe02f000)
[ 46.599066] PM: Writing back config space on device 0000:00:02.0 at offset 1 (was b00006, writing b00007)
[ 46.612354] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 23
[ 46.612358] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 46.612371] usb usb1: root hub lost power or was reset
[ 46.612378] ehci_hcd 0000:00:02.1: debug port 1
[ 46.612380] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[ 46.612390] PM: Writing back config space on device 0000:00:04.0 at offset b (was 82391043, writing 8239f043)
[ 46.612397] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 46.612409] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 46.612441] ata8: port disabled. ignoring.
[ 46.612443] ata8: reset failed, giving up
[ 46.626342] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 46.626357] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 46.626369] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 46.626382] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 46.626395] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 46.626408] PCI: Setting latency timer of device 0000:00:0f.0 to 64
[ 46.638998] PM: Writing back config space on device 0000:01:08.0 at offset 1 (was 2900005, writing 2900001)
[ 46.639008] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
[ 46.646863] PCI: Setting latency timer of device 0000:06:00.0 to 64
[ 46.646918] ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [APC6] -> GSI 16 (level, low) -> IRQ 16
[ 46.646933] PM: Writing back config space on device 0000:07:00.1 at offset 1 (was 100000, writing 100004)
[ 46.678942] usb usb2: root hub lost power or was reset
[ 46.745556] usbdev1.28_ep00: PM: resume from 0, parent 1-2 still 1
[ 46.745558] hub 1-2:1.0: PM: resume from 1, parent 1-2 still 1
[ 46.745561] usbdev1.28_ep81: PM: resume from 0, parent 1-2:1.0 still 1
[ 46.745564] usbdev1.30_ep00: PM: resume from 0, parent 1-5 still 1
[ 46.745567] usb-storage 1-5:1.0: PM: resume from 1, parent 1-5 still 1
[ 46.745570] host7: PM: resume from 0, parent 1-5:1.0 still 1
[ 46.745573] usbdev1.30_ep01: PM: resume from 0, parent 1-5:1.0 still 1
[ 46.745575] usbdev1.30_ep82: PM: resume from 0, parent 1-5:1.0 still 1
[ 46.745578] usbdev2.12_ep00: PM: resume from 0, parent 2-3 still 1
[ 46.745581] usb 2-3:1.0: PM: resume from 1, parent 2-3 still 1
[ 46.745584] usbdev2.12_ep81: PM: resume from 0, parent 2-3:1.0 still 1
[ 46.745586] usbdev2.12_ep02: PM: resume from 0, parent 2-3:1.0 still 1
[ 46.745589] usb 1-2.3: PM: resume from 1, parent 1-2 still 1
[ 46.745592] usbdev1.31_ep00: PM: resume from 0, parent 1-2.3 still 1
[ 46.745595] usbhid 1-2.3:1.0: PM: resume from 1, parent 1-2.3 still 1
[ 46.745597] usbdev1.31_ep81: PM: resume from 0, parent 1-2.3:1.0 still 1
[ 46.745600] usb 1-2.4: PM: resume from 1, parent 1-2 still 1
[ 46.745603] usbdev1.32_ep00: PM: resume from 0, parent 1-2.4 still 1
[ 46.745606] usbhid 1-2.4:1.0: PM: resume from 1, parent 1-2.4 still 1
[ 46.745608] usbdev1.32_ep81: PM: resume from 0, parent 1-2.4:1.0 still 1
[ 46.748609] Restarting tasks ... done.
[ 46.978564] ata1: SATA link down (SStatus 0 SControl 300)
[ 46.988548] usb 2-3: USB disconnect, address 12
[ 47.772562] usb 1-2: USB disconnect, address 28
[ 47.772566] usb 1-2.3: USB disconnect, address 31
[ 47.772751] usb 1-2.4: USB disconnect, address 32
[ 47.877433] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 47.885748] usb 1-2: new high speed USB device using ehci_hcd and address 33
[ 47.894989] ata2.00: configured for UDMA/133
[ 47.895035] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 47.895043] sda: Write Protect is off
[ 47.895045] sda: Mode Sense: 00 3a 00 00
[ 47.895055] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 47.927453] ata7.00: configured for UDMA/33
[ 47.948020] usb 1-2: configuration #1 chosen from 1 choice
[ 47.948171] hub 1-2:1.0: USB hub found
[ 47.948340] hub 1-2:1.0: 4 ports detected
[ 48.007363] ata7.01: configured for UDMA/33
[ 48.087186] usb 1-5: USB disconnect, address 30
[ 48.200356] usb 1-5: new high speed USB device using ehci_hcd and address 35
[ 48.263383] usb 1-5: configuration #1 chosen from 1 choice
[ 48.263755] scsi10 : SCSI emulation for USB Mass Storage devices
[ 48.263856] usb-storage: device found at 35
[ 48.263858] usb-storage: waiting for device to settle before scanning
[ 48.383455] usb 2-3: new full speed USB device using ohci_hcd and address 13
[ 48.458433] usb 2-3: configuration #1 chosen from 1 choice
[ 48.553393] usb 1-2.3: new low speed USB device using ehci_hcd and address 36
[ 48.597647] usb 1-2.3: configuration #1 chosen from 1 choice
[ 48.599177] input: Logitech USB-PS/2 Optical Mouse as /class/input/input14
[ 48.599206] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.1-2.3
[ 48.693218] usb 1-2.4: new low speed USB device using ehci_hcd and address 37
[ 48.743343] usb 1-2.4: configuration #1 chosen from 1 choice
[ 48.745447] input: HID 046a:0001 as /class/input/input15
[ 48.745474] input: USB HID v1.00 Keyboard [HID 046a:0001] on usb-0000:00:02.1-2.4
[ 50.761266] scsi 10:0:0:0: Direct-Access Generic CF Reader 1.01 PQ: 0 ANSI: 0
[ 50.762291] sd 10:0:0:0: Attached scsi removable disk sdb
[ 50.762324] sd 10:0:0:0: Attached scsi generic sg3 type 0
[ 50.762761] scsi 10:0:0:1: Direct-Access Generic SM/SD/MS Reader 1.00 PQ: 0 ANSI: 0
[ 50.987471] SCSI device sdc: 1984000 512-byte hdwr sectors (1016 MB)
[ 50.988530] sdc: Write Protect is off
[ 50.988533] sdc: Mode Sense: 03 00 00 00
[ 50.988535] sdc: assuming drive cache: write through
[ 50.991339] SCSI device sdc: 1984000 512-byte hdwr sectors (1016 MB)
[ 50.992774] sdc: Write Protect is off
[ 50.992777] sdc: Mode Sense: 03 00 00 00
[ 50.992779] sdc: assuming drive cache: write through
[ 50.992784] sdc: sdc1
[ 50.993510] sd 10:0:0:1: Attached scsi removable disk sdc
[ 50.993545] sd 10:0:0:1: Attached scsi generic sg4 type 0
[ 50.994196] usb-storage: device scan complete
[ 51.419715] [drm] Loading R300 Microcode
[ 96.950745] usb 1-5: USB disconnect, address 35
--
Tobias PGP: http://9ac7e0bc.uguu.de
このメールは十割再利用されたビットで作られています。
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
