Tobias Diedrich wrote:
Possibly a known issue:
After resume pata_amd drops from UDMA/33 to PIO on my system.
Reloading the module puts both attached optical drives (master and
slave) back to UDMA/33.
AFAICS "simplex DMA is claimed by other device, disabling DMA" seems
to be causing it to drop to PIO (but only after a suspend/resume
cycle, not on boot or module load).
Burning a DVD with 6x speed using PIO makes heavy use of burnproof
and makes the whole system quite sluggish. :)
Yes, the fact that it's going into simplex mode is the problem, it
wasn't in simplex to start with. It looks like pata_amd does an
ata_pci_clear_simplex only for certain chip models, maybe this model
needs it as well?
--
Robert Hancock Saskatoon, SK, Canada
To email, remove "nospam" from [email protected]
Home Page: http://www.roberthancock.com/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
