Re: UDP packets loss

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 15 Nov 2006 00:15:47 +0200 (IST)
[email protected] wrote:

> Hi,
> I am running a client/server test app over IPOIB in which the client sends
> a certain amount of data to the server. When the transmittion ends, the
> server prints the bandwidth and how much data it received. I can see that
> the server reports it received about 60% that the client sent. However,
> when I look at the server's interface counters before and after the
> transmittion, I see that it actually received all the data that the client
> sent. This leads me to suspect that the networking layer somehow dropped
> some of the data. One thing to not - the CPU is 100% busy at the receiver.
> Could this be the reason (the machine I am using is 2 dual cores - 4
> CPUs).

If receiver application can't keep up UDP drops packets. The counter
receive buffer errors (UDP_MIB_RCVBUFERRORS) is incremented.

Don't expect flow control or reliable delivery; it's a datagram service!

> The secod question is how do I make the interrupts be srviced by all CPUs?
> I tried through the procfs as described by IRQ-affinity.txt but I can set
> the mask to 0F bu then I read back and see it is indeed 0f but after a few
> seconds I see it back to 02 (which means only CPU1).

Most likely, the user level irq balance daemon (irqbalanced) is adjusting it?

> 
> One more thing - the device I am using is capable of generating MSIX
> interrupts.
> 

Look at device capabilities with:

	lspci -vv


-- 
Stephen Hemminger <[email protected]>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux