Ryan Richter wrote:
On Wed, Oct 18, 2006 at 12:26:25AM +0100, Alan Cox wrote:
Ar Maw, 2006-10-17 am 18:23 -0400, ysgrifennodd Ryan Richter:
02:00.0 IDE interface: Marvell Technology Group Ltd. Unknown device 6101 (rev b1) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Marvell Technology Group Ltd. Unknown device 6101
That should work with libata and the newest driver version I posted (the
earlier one won't handle the 6101 just 6145). You need at least rev
0.0.4t.
OK, now it's doing a little better. It seems to recognize the
controller and drive, but it's not getting assigned a /dev/[sh]d? device
(it doesn't show up in /proc/diskstats, e.g.). Here's the relevant
portion of dmesg:
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:02:00.0 to 64
ata5: PATA max UDMA/100 cmd 0x1018 ctl 0x1026 bmdma 0x1000 irq 17
scsi4 : pata_marvell
BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:01 0D:00 0E:00 0F:00
ata5.00: ATAPI, max UDMA/33
ata5.00: applying bridge limits
ata5.00: configured for UDMA/33
scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H10N JL10 PQ: 0 ANSI: 5
scsi 4:0:0:0: Attached scsi generic sg0 type 5
Is the sr driver compiled in/loaded? The drive will show up as something
like /dev/sr0 or /dev/scd0, depending on distribution.
--
Robert Hancock Saskatoon, SK, Canada
To email, remove "nospam" from [email protected]
Home Page: http://www.roberthancock.com/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
