Ryan Richter wrote:
> > Try adding all-generic-ide to the kernel command line, and if that
> > fails, post your lspci output.
>
I tried this and also the Marvell PATA driver you posted, and still
nothing.
Here's my lspci output and my current .config:
02:00.0 IDE interface: Marvell Technology Group Ltd. Unknown device
6101 (rev b1) (prog-if 8f [Master SecP SecO PriP PriO])
My own lspci says:
02:00.0 IDE interface: Marvell Technology Group Ltd. Unknown device
6101 (rev b1)
and the DVD works:
Unknown: IDE controller at PCI slot 0000:02:00.0
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 169
Unknown: chipset revision 177
Unknown: 100% native mode on irq 169
ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0x2008-0x200f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: HL-DT-ST DVDRAM GSA-H10A, ATAPI CD/DVD-ROM drive
ide0 at 0x2018-0x201f,0x2026 on irq 169
Since I'm running a Fedora kernel, you might want to look at their
patchlist and .config. I briefly ran mainline, but I can't remember if
I accessed the drive while running that.
--
Do not meddle in the internals of kernels, for they are subtle and quick to panic.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
